Modelling

More questions on this topic: A2 Pure: Modelling (144)

Your progress
0 of 81 done
Ticks are kept only in this browser: clearing your browsing data or changing device loses them. · ·

Edexcel

Edexcel · Old spec

AQA

OCR A

OCR MEI

WJEC

June 2025 Paper 1 Q13

EdexcelCurrent spec12 marksLogs & ExponentialsModelling

13.

In this question you must show all stages of your working.

Solutions relying entirely on calculator technology are not acceptable.

The growth of a particular tree is monitored over a period of time.

The height, \(h\) metres, of this tree, \(t\) years after it was planted, is modelled by the equation\[h = 31 - A\mathrm{e}^{-kt}\]where \(A\) and \(k\) are positive constants.

Given that

  • exactly 10 years after it was planted, the height of the tree was 6 m
  • exactly 20 years after it was planted, the height of the tree was 11 m
(a) find a complete equation for \(h\) in terms of \(t\), giving the value of each of \(A\) and \(k\) to 3 significant figures. (4)

Use the equation of the model to answer parts (b), (c) and (d).

According to the model, there is a limit to the height to which this tree can grow.

(b) Deduce this limit. (1)
(c)
(i) Find the initial height of the tree.
(ii) Hence explain whether this is a suitable model for the early growth of the tree. (2)
(d)
(i) Find \(\dfrac{\mathrm{d}h}{\mathrm{d}t}\), giving your answer in simplest form. (2)
(ii) Hence find the value of \(t\) for which the height of the tree is increasing at a rate of 30 cm per year. (3)

June 2025 Paper 1 Q11

EdexcelCurrent spec13 marksDifferentiationModelling

11.

In this question you must show all stages of your working.

Solutions relying entirely on calculator technology are not acceptable.

Figure 4: a feeding trough in the shape of a hollow half-cylinder lying on its curved side, with radius r cm marked across the semicircular end and length l cm marked along the top edge
Figure 4

Figure 4 shows a design for a feeding trough.

The trough is modelled as a hollow, semicircular cylinder of radius \(r\) cm and length \(l\) cm.

The trough will be made from sheet metal of negligible thickness.

Given that the capacity of the trough will be \(90\,000\pi\ \text{cm}^3\)

(a) show that the total area, \(A\ \text{cm}^2\), of sheet metal required to make the trough is given by\[A = \frac{180\,000\pi}{r} + \pi r^2\] (4)
(b) Use calculus to find the radius of the trough for which \(A\) is a minimum. (4)
(c) Show that the radius found in part (b) gives the minimum value of \(A\). (2)

Given that the sheet metal costs £30 per square metre

(d) calculate the minimum cost of sheet metal required to make one trough. (2)
(e) State one assumption you have made in calculating your answer to part (d). (1)

June 2025 Paper 1 Q7

EdexcelCurrent spec10 marksModellingQuadratics

7.

Figure 3: graph of P against x: an n-shaped parabola that crosses the positive x-axis twice, with its maximum above the x-axis
Figure 3

A company makes a particular type of chair.

The annual profit made by the company is modelled by the equation\[P = -x^2 + 260x - 16\,450\]where \(P\) is the profit measured in thousands of pounds and \(x\) is the selling price of the chair in pounds.

The graph of \(P\) against \(x\) is shown in Figure 3.

Using the model,

(a) explain why £175 is not a sensible selling price for the chair. (2)

Given that the company made an annual profit of more than £200 000

(b) find, according to the model, the highest possible selling price for the chair.
You must show your working clearly. (3)
(c) Show that\[P = a + b(x + c)^2\]where \(a\), \(b\) and \(c\) are constants to be found. (3)

The company wishes to maximise its annual profit.

State, according to the model,

(d)
(i) the maximum possible annual profit,
(ii) the selling price of the chair that maximises the annual profit. (2)

June 2024 Paper 1 Q12

EdexcelCurrent spec13 marksDifferentiationModelling

12.

Figure 5: plan view of a pool: a quarter circle of radius x joined to two x by y rectangles, one above the other’s side; side AB of length y is marked at the inner corner
Figure 5

Figure 5 shows the plan view of the design for a swimming pool.

The pool is modelled as a quarter of a circle joined to two equal sized rectangles as shown.

Given that

  • the quarter circle has radius \(x\) metres
  • the rectangles each have length \(x\) metres and width \(y\) metres
  • the total surface area of the swimming pool is \(100\ \text{m}^2\)
(a) show that, according to the model, the perimeter \(P\) metres of the swimming pool is given by\[P = 2x + \frac{200}{x}\] (5)
(b) Use calculus to find the value of \(x\) for which \(P\) has a stationary value. (4)
(c) Prove, by further calculus, that this value of \(x\) gives a minimum value for \(P\) (2)

Access to the pool is by side \(AB\) shown in Figure 5.

Given that \(AB\) must be at least one metre,

(d) determine, according to the model, whether the swimming pool with the minimum perimeter would be suitable. (2)

June 2024 Paper 1 Q11

EdexcelCurrent spec6 marksLogs & ExponentialsModelling

11. The prices of two precious metals are being monitored.

The price per gram of metal \(A\), £\(V_A\), is modelled by the equation\[V_A = 100 + 20\mathrm{e}^{0.04t}\]where \(t\) is the number of months after monitoring began.

The price per gram of metal \(B\), £\(V_B\), is modelled by the equation\[V_B = p\mathrm{e}^{-0.02t}\]where \(p\) is a positive constant and \(t\) is the number of months after monitoring began.

Given that \(V_B = 2V_A\) when \(t = 0\)

(a) find the value of \(p\) (2)

When \(t = T\), the rate of increase in the price per gram of metal \(A\) was equal to the rate of decrease in the price per gram of metal \(B\)

(b) Find the value of \(T\), giving your answer to one decimal place.
(Solutions based entirely on calculator technology are not acceptable.) (4)

June 2024 Paper 1 Q7

EdexcelCurrent spec5 marksLogs & ExponentialsModelling

7.

Figure 2: sketch of a straight line on axes of log₁₀ P against x, from (0, 3.3) on the vertical axis down to (6, 2.1)
Figure 2

A chimney emits smoke particles.

On a particular day, the concentration of smoke particles in the air emitted by this chimney, \(P\) parts per million, is measured at various distances, \(x\) km, from the chimney.

Figure 2 shows a sketch of the linear relationship between \(\log_{10} P\) and \(x\) that is used to model this situation.

The line passes through the point \((0,\ 3.3)\) and the point \((6,\ 2.1)\)

(a) Find a complete equation for the model in the form\[P = ab^x\]where \(a\) and \(b\) are constants. Give the value of \(a\) and the value of \(b\) each to 4 significant figures. (4)
(b) With reference to the model, interpret the value of \(ab\) (1)

June 2023 Paper 1 Q11

EdexcelCurrent spec6 marksLogs & ExponentialsModelling

11. The height, \(h\) metres, of a plant, \(t\) years after it was first measured, is modelled by the equation

\[h = 2.3 - 1.7\mathrm{e}^{-0.2t} \qquad t \in \mathbb{R} \quad t \geqslant 0\]

Using the model,

(a) find the height of the plant when it was first measured, (2)
(b) show that, exactly 4 years after it was first measured, the plant was growing at approximately 15.3 cm per year. (3)

According to the model, there is a limit to the height to which this plant can grow.

(c) Deduce the value of this limit. (1)

June 2023 Paper 1 Q7

EdexcelCurrent spec8 marksModelling

7. The distance a particular car can travel in a journey starting with a full tank of fuel was investigated.

  • From a full tank of fuel, 40 litres remained in the car’s fuel tank after the car had travelled 80 km
  • From a full tank of fuel, 25 litres remained in the car’s fuel tank after the car had travelled 200 km

Using a linear model, with \(V\) litres being the volume of fuel remaining in the car’s fuel tank and \(d\) km being the distance the car had travelled,

(a) find an equation linking \(V\) with \(d\). (4)

Given that, on a particular journey

  • the fuel tank of the car was initially full
  • the car continued until it ran out of fuel

find, according to the model,

(b)
(i) the initial volume of fuel that was in the fuel tank of the car,
(ii) the distance that the car travelled on this journey. (3)

In fact the car travelled 320 km on this journey.

(c) Evaluate the model in light of this information. (1)

June 2022 Paper 1 Q12

EdexcelCurrent spec12 marksDifferentiationModelling

12. A company makes drinks containers out of metal.

The containers are modelled as closed cylinders with base radius \(r\) cm and height \(h\) cm and the capacity of each container is 355 cm3

The metal used

  • for the circular base and the curved side costs 0.04 pence/cm2
  • for the circular top costs 0.09 pence/cm2

Both metals used are of negligible thickness.

(a) Show that the total cost, \(C\) pence, of the metal for one container is given by\[C = 0.13\pi r^2 + \frac{28.4}{r}\] (4)
(b) Use calculus to find the value of \(r\) for which \(C\) is a minimum, giving your answer to 3 significant figures. (4)
(c) Using \(\dfrac{\mathrm{d}^2C}{\mathrm{d}r^2}\) prove that the cost is minimised for the value of \(r\) found in part (b). (2)
(d) Hence find the minimum value of \(C\), giving your answer to the nearest integer. (2)

June 2022 Paper 1 Q8

EdexcelCurrent spec6 marksLogs & ExponentialsModelling

8.

In this question you must show all stages of your working.

Solutions relying entirely on calculator technology are not acceptable.

The air pressure, \(P\) kg/cm2, inside a car tyre, \(t\) minutes from the instant when the tyre developed a puncture is given by the equation

\[P = k + 1.4\mathrm{e}^{-0.5t} \qquad t \in \mathbb{R} \qquad t \geqslant 0\]

where \(k\) is a constant.

Given that the initial air pressure inside the tyre was 2.2 kg/cm2

(a) state the value of \(k\). (1)

From the instant when the tyre developed the puncture,

(b) find the time taken for the air pressure to fall to 1 kg/cm2
Give your answer in minutes to one decimal place. (3)
(c) Find the rate at which the air pressure in the tyre is decreasing exactly 2 minutes from the instant when the tyre developed the puncture.
Give your answer in kg/cm2 per minute to 3 significant figures. (2)

June 2022 Paper 1 Q5

EdexcelCurrent spec10 marksLogs & ExponentialsModelling

5. The mass, \(A\) kg, of algae in a small pond, is modelled by the equation

\[A = pq^t\]

where \(p\) and \(q\) are constants and \(t\) is the number of weeks after the mass of algae was first recorded.

Data recorded indicates that there is a linear relationship between \(t\) and \(\log_{10} A\) given by the equation

\[\log_{10} A = 0.03t + 0.5\]
(a) Use this relationship to find a complete equation for the model in the form\[A = pq^t\]giving the value of \(p\) and the value of \(q\) each to 4 significant figures. (4)
(b) With reference to the model, interpret
(i) the value of the constant \(p\),
(ii) the value of the constant \(q\). (2)
(c) Find, according to the model,
(i) the mass of algae in the pond when \(t = 8\), giving your answer to the nearest 0.5 kg,
(ii) the number of weeks it takes for the mass of algae in the pond to reach 4 kg. (3)
(d) State one reason why this may not be a realistic model in the long term. (1)

November 2021 Paper 1 Q13

EdexcelCurrent spec7 marksLogs & ExponentialsModelling

13.

Figure 2: straight line graph of log10 h against log10 m, starting at 2.25 on the vertical axis and sloping downwards
Figure 2

The resting heart rate, \(h\), of a mammal, measured in beats per minute, is modelled by the equation

\[h = pm^q\]

where \(p\) and \(q\) are constants and \(m\) is the mass of the mammal measured in kg.

Figure 2 illustrates the linear relationship between \(\log_{10}h\) and \(\log_{10}m\)

The line meets the vertical \(\log_{10}h\) axis at 2.25 and has a gradient of \(-0.235\)

(a) Find, to 3 significant figures, the value of \(p\) and the value of \(q\). (3)

A particular mammal has a mass of 5 kg and a resting heart rate of 119 beats per minute.

(b) Comment on the suitability of the model for this mammal. (3)
(c) With reference to the model, interpret the value of the constant \(p\). (1)

November 2021 Paper 1 Q11

EdexcelCurrent spec6 marksLogs & ExponentialsModelling

11. The owners of a nature reserve decided to increase the area of the reserve covered by trees.

Tree planting started on 1st January 2005.

The area of the nature reserve covered by trees, \(A\ \text{km}^2\), is modelled by the equation

\[A = 80 - 45\mathrm{e}^{ct}\]

where \(c\) is a constant and \(t\) is the number of years after 1st January 2005.

Using the model,

(a) find the area of the nature reserve that was covered by trees just before tree planting started. (1)

On 1st January 2019 an area of \(60\ \text{km}^2\) of the nature reserve was covered by trees.

(b) Use this information to find a complete equation for the model, giving your value of \(c\) to 3 significant figures. (4)

On 1st January 2020, the owners of the nature reserve announced a long-term plan to have \(100\ \text{km}^2\) of the nature reserve covered by trees.

(c) State a reason why the model is not appropriate for this plan. (1)

November 2021 Paper 1 Q4

EdexcelCurrent spec5 marksModellingVectors

4. [In this question the unit vectors \(\mathbf{i}\) and \(\mathbf{j}\) are due east and due north respectively.]

A stone slides horizontally across ice.

Initially the stone is at the point \(A(-24\mathbf{i} - 10\mathbf{j})\) m relative to a fixed point \(O\).

After 4 seconds the stone is at the point \(B(12\mathbf{i} + 5\mathbf{j})\) m relative to the fixed point \(O\).

The motion of the stone is modelled as that of a particle moving in a straight line at constant speed.

Using the model,

(a) prove that the stone passes through \(O\), (2)
(b) calculate the speed of the stone. (3)

October 2020 Paper 1 Q12

EdexcelCurrent spec7 marksLogs & ExponentialsModelling

12. An advertising agency is monitoring the number of views of an online advert.

The equation

\[\log_{10} V = 0.072t + 2.379 \qquad 1 \leqslant t \leqslant 30,\ t \in \mathbb{N}\]

is used to model the total number of views of the advert, \(V\), in the first \(t\) days after the advert went live.

(a) Show that \(V = ab^t\) where \(a\) and \(b\) are constants to be found.

Give the value of \(a\) to the nearest whole number and give the value of \(b\) to 3 significant figures.

(4)
(b) Interpret, with reference to the model, the value of \(ab\). (1)

Using this model, calculate

(c) the total number of views of the advert in the first 20 days after the advert went live. Give your answer to 2 significant figures. (2)

October 2020 Paper 1 Q8

EdexcelCurrent spec9 marksLogs & ExponentialsModelling

8. The temperature, \(\theta\ ^\circ\mathrm{C}\), of a cup of tea \(t\) minutes after it was placed on a table in a room, is modelled by the equation

\[\theta = 18 + 65\mathrm{e}^{-\frac{t}{8}}\qquad t \geqslant 0\]

Find, according to the model,

(a) the temperature of the cup of tea when it was placed on the table, (1)
(b) the value of \(t\), to one decimal place, when the temperature of the cup of tea was \(35\ ^\circ\mathrm{C}\). (3)
(c) Explain why, according to this model, the temperature of the cup of tea could not fall to \(15\ ^\circ\mathrm{C}\). (1)
Figure 2: sketch of μ against t: a decreasing curve from (0, 94) on the μ-axis through (8, 50), approaching the horizontal dashed asymptote l above the t-axis
Figure 2

The temperature, \(\mu\ ^\circ\mathrm{C}\), of a second cup of tea \(t\) minutes after it was placed on a table in a different room, is modelled by the equation

\[\mu = A + B\mathrm{e}^{-\frac{t}{8}}\qquad t \geqslant 0\]

where \(A\) and \(B\) are constants.

Figure 2 shows a sketch of \(\mu\) against \(t\) with two data points that lie on the curve.

The line \(l\), also shown on Figure 2, is the asymptote to the curve.

Using the equation of this model and the information given in Figure 2

(d) find an equation for the asymptote \(l\). (4)

October 2020 Paper 1 Q4

EdexcelCurrent spec6 marksModelling

4. In 1997 the average CO2 emissions of new cars in the UK was 190 g/km.

In 2005 the average CO2 emissions of new cars in the UK had fallen to 169 g/km.

Given \(A\) g/km is the average CO2 emissions of new cars in the UK \(n\) years after 1997 and using a linear model,

(a) form an equation linking \(A\) with \(n\). (3)

In 2016 the average CO2 emissions of new cars in the UK was 120 g/km.

(b) Comment on the suitability of your model in light of this information. (3)

October 2020 Paper 1 Q2

EdexcelCurrent spec6 marksModellingVectors

2. [In this question the unit vectors \(\mathbf{i}\) and \(\mathbf{j}\) are due east and due north respectively.]

A coastguard station \(O\) monitors the movements of a small boat.

At 10:00 the boat is at the point \((4\mathbf{i} - 2\mathbf{j})\) km relative to \(O\).

At 12:45 the boat is at the point \((-3\mathbf{i} - 5\mathbf{j})\) km relative to \(O\).

The motion of the boat is modelled as that of a particle moving in a straight line at constant speed.

(a) Calculate the bearing on which the boat is moving, giving your answer in degrees to one decimal place. (3)
(b) Calculate the speed of the boat, giving your answer in \(\mathrm{km\,h^{-1}}\) (3)

June 2019 Paper 1 Q14

EdexcelCurrent spec9 marksLogs & ExponentialsModelling

14. The value of a car, £\(V\), can be modelled by the equation\[V = 15\,700\mathrm{e}^{-0.25t} + 2300 \qquad t \in \mathbb{R},\ t \geqslant 0\]where the age of the car is \(t\) years.

Using the model,

(a) find the initial value of the car. (1)

Given the model predicts that the value of the car is decreasing at a rate of £500 per year at the instant when \(t = T\),

(b)
(i) show that\[3925\mathrm{e}^{-0.25T} = 500\]
(ii) Hence find the age of the car at this instant, giving your answer in years and months to the nearest month.

(Solutions based entirely on graphical or numerical methods are not acceptable.) (6)

The model predicts that the value of the car approaches, but does not fall below, £\(A\).

(c) State the value of \(A\). (1)
(d) State a limitation of this model. (1)

June 2019 Paper 1 Q9

EdexcelCurrent spec6 marksModellingQuadratics

9. A company started mining tin in Riverdale on 1st January 2019.

A model to find the total mass of tin that will be mined by the company in Riverdale is given by the equation\[T = 1200 - 3(n - 20)^2\]where \(T\) tonnes is the total mass of tin mined in the \(n\) years after the start of mining.

Using this model,

(a) calculate the mass of tin that will be mined up to 1st January 2020, (1)
(b) deduce the maximum total mass of tin that could be mined, (1)
(c) calculate the mass of tin that will be mined in 2023. (2)
(d) State, giving reasons, the limitation on the values of \(n\). (2)

June 2019 Paper 1 Q4

EdexcelCurrent spec5 marksModelling

4. A tree was planted in the ground.
Its height, \(H\) metres, was measured \(t\) years after planting.

Exactly 3 years after planting, the height of the tree was 2.35 metres.
Exactly 6 years after planting, the height of the tree was 3.28 metres.

Using a linear model,

(a) find an equation linking \(H\) with \(t\). (3)

The height of the tree was approximately 140 cm when it was planted.

(b) Explain whether or not this fact supports the use of the linear model in part (a). (2)

June 2018 Paper 1 Q13

EdexcelCurrent spec8 marksLogs & ExponentialsModelling

13.

Figure 3: graph of log₁₀V against t: a straight line l with positive gradient and positive intercept on the vertical axis
Figure 3

The value of a rare painting, £\(V\), is modelled by the equation \(V = pq^t\), where \(p\) and \(q\) are constants and \(t\) is the number of years since the value of the painting was first recorded on 1st January 1980.

The line \(l\) shown in Figure 3 illustrates the linear relationship between \(t\) and \(\log_{10} V\) since 1st January 1980.

The equation of line \(l\) is \(\log_{10} V = 0.05t + 4.8\)

(a) Find, to 4 significant figures, the value of \(p\) and the value of \(q\). (4)
(b) With reference to the model interpret
(i) the value of the constant \(p\),
(ii) the value of the constant \(q\). (2)
(c) Find the value of the painting, as predicted by the model, on 1st January 2010, giving your answer to the nearest hundred thousand pounds. (2)

June 2018 Paper 1 Q8

EdexcelCurrent spec9 marksDifferentiationModelling

8. A lorry is driven between London and Newcastle.

In a simple model, the cost of the journey £\(C\) when the lorry is driven at a steady speed of \(v\) kilometres per hour is

\[C = \frac{1500}{v} + \frac{2v}{11} + 60\]
(a) Find, according to this model,
(i) the value of \(v\) that minimises the cost of the journey,
(ii) the minimum cost of the journey.
(Solutions based entirely on graphical or numerical methods are not acceptable.) (6)
(b) Prove by using \(\dfrac{\mathrm{d}^2C}{\mathrm{d}v^2}\) that the cost is minimised at the speed found in (a)(i). (2)
(c) State one limitation of this model. (1)

June 2018 Paper 1 Q6

EdexcelCurrent spec7 marksModellingQuadratics

6.

Figure 1: sketch of P against x: an n-shaped parabola P = 100 − 6.25(x − 9)² crossing the positive x-axis twice, with its maximum above the x-axis
Figure 1

A company makes a particular type of children’s toy.

The annual profit made by the company is modelled by the equation

\[P = 100 - 6.25(x - 9)^2\]

where \(P\) is the profit measured in thousands of pounds and \(x\) is the selling price of the toy in pounds.

A sketch of \(P\) against \(x\) is shown in Figure 1.

Using the model,

(a) explain why £15 is not a sensible selling price for the toy. (2)

Given that the company made an annual profit of more than £80 000

(b) find, according to the model, the least possible selling price for the toy. (3)

The company wishes to maximise its annual profit.

State, according to the model,

(c)
(i) the maximum possible annual profit,
(ii) the selling price of the toy that maximises the annual profit. (2)

C2 June 2015 Q9

EdexcelOld spec10 marksDifferentiationModelling

9. A solid glass cylinder, which is used in an expensive laser amplifier, has a volume of \(75\pi\) cm3.
The cost of polishing the surface area of this glass cylinder is £2 per cm2 for the curved surface area and £3 per cm2 for the circular top and base areas.

Given that the radius of the cylinder is \(r\) cm,

(a) show that the cost of the polishing, £\(C\), is given by\[C = 6\pi r^2 + \frac{300\pi}{r}\] (4)
(b) Use calculus to find the minimum cost of the polishing, giving your answer to the nearest pound. (5)
(c) Justify that the answer that you have obtained in part (b) is a minimum. (1)

C2 June 2014 (R) Q9

EdexcelOld spec13 marksDifferentiationModelling

9.

Figure 4: plan of a pool made of equilateral triangle BFA with side x m, rectangle BCEF with EF = y m, and semicircle CDE
Figure 4

Figure 4 shows the plan of a pool.

The shape of the pool \(ABCDEFA\) consists of a rectangle \(BCEF\) joined to an equilateral triangle \(BFA\) and a semi-circle \(CDE\), as shown in Figure 4.

Given that \(AB = x\) metres, \(EF = y\) metres, and the area of the pool is 50 m2,

(a) show that\[y = \frac{50}{x} - \frac{x}{8}\left(\pi + 2\sqrt{3}\right)\] (3)
(b) Hence show that the perimeter, \(P\) metres, of the pool is given by\[P = \frac{100}{x} + \frac{x}{4}\left(\pi + 8 - 2\sqrt{3}\right)\] (3)
(c) Use calculus to find the minimum value of \(P\), giving your answer to 3 significant figures. (5)
(d) Justify, by further differentiation, that the value of \(P\) that you have found is a minimum. (2)

C1 June 2014 (R) Q6

EdexcelOld spec9 marksModellingQuadratics

6.

Figure 1: L-shaped plan of a garden with top edge 2x + 1, left edge 4x, step down 2x and bottom edge 6x + 3; diagram not to scale
Figure 1

Figure 1 shows the plan of a garden. The marked angles are right angles.

The six edges are straight lines.

The lengths shown in the diagram are given in metres.

Given that the perimeter of the garden is greater than 40 m,

(a) show that \(x > 1.7\) (3)

Given that the area of the garden is less than 120 m2,

(b) form and solve a quadratic inequality in \(x\). (5)
(c) Hence state the range of the possible values of \(x\). (1)

C2 June 2014 Q10

EdexcelOld spec14 marksDifferentiationModelling

10.

Figure 4: closed letter box ABFEHGCD, a right prism of length y cm
Figure 4
Figure 5: trapezium ABCD with DA = 9x cm, AB = 4x cm, BC = 6x cm, CD = 5x cm and right angles at A and B
Figure 5

Figure 4 shows a closed letter box \(ABFEHGCD\), which is made to be attached to a wall of a house.

The letter box is a right prism of length \(y\) cm as shown in Figure 4. The base \(ABFE\) of the prism is a rectangle. The total surface area of the six faces of the prism is \(S\) cm2.

The cross section \(ABCD\) of the letter box is a trapezium with edges of lengths \(DA = 9x\) cm, \(AB = 4x\) cm, \(BC = 6x\) cm and \(CD = 5x\) cm as shown in Figure 5.
The angle \(DAB = 90^\circ\) and the angle \(ABC = 90^\circ\).

The volume of the letter box is 9600 cm3.

(a) Show that\[y = \frac{320}{x^2}\] (2)
(b) Hence show that the surface area of the letter box, \(S\) cm2, is given by\[S = 60x^2 + \frac{7680}{x}\] (4)
(c) Use calculus to find the minimum value of \(S\). (6)
(d) Justify, by further differentiation, that the value of \(S\) you have found is a minimum. (2)

C1 June 2013 (R) Q8

EdexcelOld spec8 marksModellingQuadratics

8. A rectangular room has a width of \(x\) m.

The length of the room is 4 m longer than its width.

Given that the perimeter of the room is greater than 19.2 m,

(a) show that \(x > 2.8\) (3)

Given also that the area of the room is less than 21 m\(^2\),

(b)
(i) write down an inequality, in terms of \(x\), for the area of the room.
(ii) Solve this inequality.
(4)
(c) Hence find the range of possible values for \(x\). (1)

C2 June 2012 Q8

EdexcelOld spec13 marksDifferentiationModelling

8.

Figure 3: a solid circular cylinder with base radius x mm and height h mm
Figure 3

A manufacturer produces pain relieving tablets. Each tablet is in the shape of a solid circular cylinder with base radius \(x\) mm and height \(h\) mm, as shown in Figure 3.

Given that the volume of each tablet has to be 60 mm\(^3\),

(a) express \(h\) in terms of \(x\), (1)
(b) show that the surface area, \(A\) mm\(^2\), of a tablet is given by \(A = 2\pi x^2 + \dfrac{120}{x}\) (3)

The manufacturer needs to minimise the surface area \(A\) mm\(^2\), of a tablet.

(c) Use calculus to find the value of \(x\) for which \(A\) is a minimum. (5)
(d) Calculate the minimum value of \(A\), giving your answer to the nearest integer. (2)
(e) Show that this value of \(A\) is a minimum. (2)

C2 January 2012 Q8

EdexcelOld spec13 marksDifferentiationModelling

8.

Figure 3: flowerbed made of a quarter circle of radius x with two x by y rectangles attached along its radii
Figure 3

Figure 3 shows a flowerbed. Its shape is a quarter of a circle of radius \(x\) metres with two equal rectangles attached to it along its radii. Each rectangle has length equal to \(x\) metres and width equal to \(y\) metres.

Given that the area of the flowerbed is 4 m2,

(a) show that\[y = \frac{16 - \pi x^2}{8x}\] (3)
(b) Hence show that the perimeter \(P\) metres of the flowerbed is given by the equation\[P = \frac{8}{x} + 2x\] (3)
(c) Use calculus to find the minimum value of \(P\). (5)
(d) Find the width of each rectangle when the perimeter is a minimum.
Give your answer to the nearest centimetre. (2)

C2 June 2011 Q8

EdexcelOld spec11 marksDifferentiationModelling

8.

Figure 2: cuboid whose rectangular cross-section has length 2x and width x
Figure 2

A cuboid has a rectangular cross-section where the length of the rectangle is equal to twice its width, \(x\) cm, as shown in Figure 2.
The volume of the cuboid is 81 cubic centimetres.

(a) Show that the total length, \(L\) cm, of the twelve edges of the cuboid is given by\[L = 12x + \frac{162}{x^2}\] (3)
(b) Use calculus to find the minimum value of \(L\). (6)
(c) Justify, by further differentiation, that the value of \(L\) that you have found is a minimum. (2)

C2 January 2011 Q10

EdexcelOld spec10 marksDifferentiationModelling

10. The volume \(V\) cm3 of a box, of height \(x\) cm, is given by\[V = 4x(5 - x)^2, \qquad 0 \lt x \lt 5\]

(a) Find \(\dfrac{\mathrm{d}V}{\mathrm{d}x}\). (4)
(b) Hence find the maximum volume of the box. (4)
(c) Use calculus to justify that the volume that you found in part (b) is a maximum. (2)

C2 January 2009 Q10

EdexcelOld spec12 marksDifferentiationModelling

10. A solid right circular cylinder has radius \(r\) cm and height \(h\) cm.

The total surface area of the cylinder is 800 cm2 .

(a) Show that the volume, \(V\) cm3 , of the cylinder is given by\[V = 400r - \pi r^3.\] (4)

Given that \(r\) varies,

(b) use calculus to find the maximum value of \(V\), to the nearest cm3. (6)
(c) Justify that the value of \(V\) you have found is a maximum. (2)

C2 January 2008 Q9

EdexcelOld spec12 marksDifferentiationModelling

9.

Figure 4: an open-topped cuboid tank with base x by y and height x
Figure 4

Figure 4 shows an open-topped water tank, in the shape of a cuboid, which is made of sheet metal. The base of the tank is a rectangle \(x\) metres by \(y\) metres. The height of the tank is \(x\) metres.

The capacity of the tank is \(100\ \mathrm{m}^3\).

(a) Show that the area \(A\ \mathrm{m}^2\) of the sheet metal used to make the tank is given by\[A = \frac{300}{x} + 2x^2.\] (4)
(b) Use calculus to find the value of \(x\) for which \(A\) is stationary. (4)
(c) Prove that this value of \(x\) gives a minimum value of \(A\). (2)
(d) Calculate the minimum area of sheet metal needed to make the tank. (2)

C2 June 2007 Q10

EdexcelOld spec11 marksDifferentiationModelling

10.

Figure 4: a cuboid brick with edges labelled 2x cm, x cm and y cm
Figure 4

Figure 4 shows a solid brick in the shape of a cuboid measuring \(2x\) cm by \(x\) cm by \(y\) cm.

The total surface area of the brick is \(600\ \mathrm{cm}^2\).

(a) Show that the volume, \(V\ \mathrm{cm}^3\), of the brick is given by\[V = 200x - \frac{4x^3}{3}.\] (4)

Given that \(x\) can vary,

(b) use calculus to find the maximum value of \(V\), giving your answer to the nearest \(\mathrm{cm}^3\). (5)
(c) Justify that the value of \(V\) you have found is a maximum. (2)

C2 January 2007 Q8

EdexcelOld spec9 marksDifferentiationModelling

8. A diesel lorry is driven from Birmingham to Bury at a steady speed of \(v\) kilometres per hour. The total cost of the journey, £\(C\), is given by\[C = \frac{1400}{v} + \frac{2v}{7}.\]

(a) Find the value of \(v\) for which \(C\) is a minimum. (5)
(b) Find \(\dfrac{\mathrm{d}^2C}{\mathrm{d}v^2}\) and hence verify that \(C\) is a minimum for this value of \(v\). (2)
(c) Calculate the minimum total cost of the journey. (2)

C2 January 2005 Q9

EdexcelOld spec12 marksDifferentiationModelling

9.

Figure 3: plan of a stage, a rectangle 2x metres by y metres joined along its 2x side to a semicircle
Figure 3

Figure 3 shows the plan of a stage in the shape of a rectangle joined to a semicircle. The length of the rectangular part is \(2x\) metres and the width is \(y\) metres. The diameter of the semicircular part is \(2x\) metres. The perimeter of the stage is 80 m.

(a) Show that the area, \(A\) m2, of the stage is given by\[A = 80x - \left(2 + \frac{\pi}{2}\right)x^2.\] (4)
(b) Use calculus to find the value of \(x\) at which \(A\) has a stationary value. (4)
(c) Prove that the value of \(x\) you found in part (b) gives the maximum value of \(A\). (2)
(d) Calculate, to the nearest m2, the maximum area of the stage. (2)

June 2025 Paper 1 Q13

AQACurrent spec9 marksLogs & ExponentialsModelling

13 A computer game awards points to a player based on the time taken to complete a level.

The points awarded decrease as the time taken to complete a level increases.

Rebekah believes that the points awarded, \(P\), can be modelled by the equation

\[P = A\mathrm{e}^{kt}\]

where \(t\) is the time, in seconds, taken to complete the level and \(A\) and \(k\) are constants.

(a) Explain, in context, the meaning of the value of \(A\) [1 mark]
(b) Show that\[\ln P = \ln A + kt\] [2 marks]
(c) Rebekah records the points and the time taken for her to complete each level.

She plots the values of \(\ln P\) against \(t\)

Rebekah obtains a straight-line graph with a gradient of \(-0.08\) and a vertical intercept of 5.30, as shown in the diagram.

Graph of ln P against t: a straight line starting at 5.30 on the vertical axis and decreasing gently

Find the value of \(A\) and the value of \(k\) [3 marks]

(d) Rebekah scores 20 points for completing a particular level.

Find, to the nearest second, the time taken to complete this level. [3 marks]

June 2024 Paper 1 Q12

AQACurrent spec6 marksModellingTrigonometry

12 The monthly mean temperature of a city, \(T\) degrees Celsius, may be modelled by the equation

\[T = 15 + 8\sin\,(30m - 120)^\circ\]

where \(m\) is the month number, counting January \(= 1\), February \(= 2\), through to December \(= 12\)

(a) Using this model, calculate the monthly mean temperature of the city for May, the fifth month. [2 marks]
(b) Using this model, find the month with the highest mean temperature. [2 marks]
(c) Climate change may affect the parameters, 8, 30, 120 and 15, used in this model.
(i) State, with a reason, which parameter would be increased because of an overall rise in temperatures. [1 mark]
(ii) State, with a reason, which parameter would be increased because of the occurrence of more extreme temperatures. [1 mark]

June 2024 Paper 2 Q10

AQACurrent spec11 marksLogs & ExponentialsModelling

10 A singer has a social media account with a number of followers. The singer releases a new song and the number of followers grows exponentially.

The number of followers, \(F\), may be modelled by the formula

\[F = a\mathrm{e}^{kt}\]

where \(t\) is the number of days since the song was released and \(a\) and \(k\) are constants.

  • Two days after the song is released the account has 2050 followers.
  • Five days after the song is released the account has 9200 followers.

On the graph below \(\ln F\) has been plotted against \(t\) for these two pieces of data.

A line has been drawn passing through these two data points.

Graph of ln F (0 to 9) against t (0 to 5) on graph paper, with crosses at t = 2 and t = 5 and a straight line through them meeting the ln F axis at about 6.6
(a)
(i) Show that \(\ln F = \ln a + kt\) [2 marks]
(ii) Using the graph, estimate the value of the constant \(a\) and the value of the constant \(k\) [4 marks]
(b)
(i) Show that \(\dfrac{\mathrm{d}F}{\mathrm{d}t} = kF\) [2 marks]
(ii) Using the model, estimate the rate at which the number of followers is increasing 5 days after the song is released. [2 marks]
(c) The singer claims that 30 days after the song is released, the account will have more than a billion followers.

Comment on the singer’s claim. [1 mark]

June 2024 Paper 1 Q7

AQACurrent spec5 marksModellingTrigonometry

7 A triangular field of grass, \(ABC\), has boundaries with lengths as follows:

\[AB = 234\text{ m} \qquad BC = 225\text{ m} \qquad AC = 310\text{ m}\]

The field is shown in the diagram below.

Triangle ABC with BC = 225 m along the top, AB = 234 m on the left and AC = 310 m on the right, with A at the bottom
(a) Find angle \(A\) [2 marks]
(b) Farmers calculate the number of sheep they can keep in a field, by allowing one sheep for every 1200 m2 of grass.

Find the maximum number of sheep which can be kept in the field \(ABC\) [3 marks]

June 2023 Paper 1 Q10

AQACurrent spec8 marksLogs & ExponentialsModelling

10 Charlie buys a car for £18 000 on 1 January 2016.

The value of the car decreases exponentially.

The car has a value of £12 000 on 1 January 2018.

(a) Charlie says:
  • because the car has lost £6000 after two years, after another two years it will be worth £6000.

Charlie’s friend Kaya says:

  • because the car has lost one third of its value after two years, after another two years it will be worth £8000.

Explain whose statement is correct, justifying the value they have stated. [2 marks]

(b) The value of Charlie’s car, £\(V\), \(t\) years after 1 January 2016 may be modelled by the equation\[V = A\mathrm{e}^{-kt}\]

where \(A\) and \(k\) are positive constants.

Find the value of \(t\) when the car has a value of £10 000, giving your answer to two significant figures. [5 marks]

(c) Give a reason why the model, in this context, will not be suitable to calculate the value of the car when \(t = 30\) [1 mark]

June 2023 Paper 2 Q10

AQACurrent spec11 marksDifferentiationModelling

10 A piece of wire of length 66 cm is bent to form the five sides of a pentagon.

The pentagon consists of three sides of a rectangle and two sides of an equilateral triangle.

The sides of the rectangle measure \(x\) cm and \(y\) cm and the sides of the triangle measure \(x\) cm, as shown in the diagram below.

Pentagon made of a rectangle with sides y (top and bottom) and x (left), with an equilateral triangle of sides x attached on the right; the shared side is dashed
(a)
(i) You are given that \(\sin 60^\circ = \dfrac{\sqrt{3}}{2}\)

Explain why the area of the triangle is \(\dfrac{\sqrt{3}}{4}x^2\) [1 mark]

(ii) Show that the area enclosed by the wire, \(A\) cm2, can be expressed by the formula\[A = 33x - \frac{1}{4}(6 - \sqrt{3})x^2\] [3 marks]
(b) Use calculus to find the value of \(x\) for which the wire encloses the maximum area.

Give your answer in the form \(p + q\sqrt{3}\), where \(p\) and \(q\) are integers.

Fully justify your answer. [7 marks]

June 2023 Paper 2 Q9

AQACurrent spec6 marksModellingQuadratics

9 A craft artist is producing items and selling them in a local market.

The selling price, £\(P\), of an item is inversely proportional to the number of items produced, \(n\)

(a) When \(n = 10\), \(P = 24\)

Show that \(P = \dfrac{240}{n}\) [1 mark]

(b) The production cost, £\(C\), of an item is inversely proportional to the square of the number of items produced, \(n\)

When \(n = 10\), \(C = 60\)

Find the set of values of \(n\) for which \(P \gt C\) [4 marks]

(c) Explain the significance to the craft artist of the range of values found in part (b). [1 mark]

June 2022 Paper 2 Q10

AQACurrent spec8 marksLogs & ExponentialsModelling

10 A bottle of water has a temperature of 6 °C when it is removed from a refrigerator.

It is placed in a room where the temperature is 20 °C

10 minutes later, the temperature of the water is 12 °C

The temperature of the water, \(T\) °C, at time \(t\) minutes after it is removed from the refrigerator, may be modelled by the equation\[T = 20 - a\mathrm{e}^{-kt}\]

(a) Find the value of \(a\). [1 mark]
(b) Calculate the value of \(k\), giving your answer to two significant figures. [3 marks]
(c) Using this model, estimate how long it takes the water to reach a temperature of 18 °C after it is taken out of the refrigerator. [3 marks]
(d) Explain why the model may not be appropriate to predict the temperature of the water three hours after it is taken out of the refrigerator. [1 mark]

June 2022 Paper 2 Q6

AQACurrent spec6 marksLogs & ExponentialsModelling

6 An on-line science website states:

‘To find a dog’s equivalent human age in years, multiply the natural logarithm of the dog’s age in years by 16 then add 31.’

(a) Calculate the equivalent age to the nearest human year of a dog aged 5 years. [1 mark]
(b) A dog’s equivalent age in human years is 40 years. Find the dog’s actual age to the nearest month. [3 marks]
(c) Explain why the behaviour of the natural logarithm for values close to zero means that the formula given on the website cannot be true for very young dogs. [2 marks]

June 2021 Paper 2 Q10

AQACurrent spec9 marksDifferentiationModelling

10 A square sheet of metal has edges 30 cm long.

Four squares each with edge \(x\) cm, where \(x \lt 15\), are removed from the corners of the sheet.

The four rectangular sections are bent upwards to form an open-topped box, as shown in the diagrams.

A 30 cm by 30 cm square; the same square with an x cm by x cm square removed from each corner; the resulting open-topped box
(a) Show that the capacity, \(C\) cm3, of the box is given by\[C = 900x - 120x^2 + 4x^3\] [2 marks]
(b) Find the maximum capacity of the box.

Fully justify your answer. [7 marks]

June 2021 Paper 1 Q7

AQACurrent spec12 marksLogs & ExponentialsModelling

7 Scientists observed a colony of seabirds over a period of 10 years starting in 2010.

They concluded that the number of birds in the colony, its population \(P\), could be modelled by a formula of the form\[P = a(10^{bt})\]where \(t\) is the time in years after 2010, and \(a\) and \(b\) are constants.

(a) Explain what the value of \(a\) represents. [1 mark]
(b) Show that \(\log_{10} P = bt + \log_{10} a\) [2 marks]
(c) The table below contains some data collected by the scientists.
Year20132015
\(t\)3
\(P\)10 20012 800
\(\log_{10} P\)4.0086
(i) Complete the table, giving the \(\log_{10} P\) value to 5 significant figures. [1 mark]
(ii) Use the data to calculate the value of \(a\) and the value of \(b\). [4 marks]
(iii) Use the model to estimate the population of the colony in 2024. [2 marks]
(d)
(i) State an assumption that must be made in using the model to estimate the population of the colony in 2024. [1 mark]
(ii) Hence comment, with a reason, on the reliability of your estimate made in part (c)(iii). [1 mark]

June 2020 Paper 2 Q11

AQACurrent spec11 marksModellingQuadratics

11 A fire crew is tackling a grass fire on horizontal ground.

The crew directs a single jet of water which flows continuously from point \(A\).

Axes x and y with origin O; point A on the positive x-axis, with a dashed curve rising from A to the right

The path of the jet can be modelled by the equation

\[y = -0.0125x^2 + 0.5x - 2.55\]

where \(x\) metres is the horizontal distance of the jet from the fire truck at \(O\) and \(y\) metres is the height of the jet above the ground.

The coordinates of point \(A\) are \((a, 0)\)

(a)
(i) Find the value of \(a\). [3 marks]
(ii) Find the horizontal distance from \(\boldsymbol{A}\) to the point where the jet hits the ground. [1 mark]
(b) Calculate the maximum vertical height reached by the jet. [4 marks]
(c) A vertical wall is located 11 metres horizontally from \(A\) in the direction of the jet. The height of the wall is 2.3 metres.

Using the model, determine whether the jet passes over the wall, stating any necessary modelling assumption. [3 marks]

June 2020 Paper 1 Q10

AQACurrent spec12 marksLogs & ExponentialsModelling

10 Raj is investigating how the price, \(P\) pounds, of a brilliant-cut diamond ring is related to the weight, \(C\) carats, of the diamond.

He believes that they are connected by a formula

\[P = aC^n\]

where \(a\) and \(n\) are constants.

(a) Express \(\ln P\) in terms of \(\ln C\). [2 marks]
(b)

Raj researches the price of three brilliant-cut diamond rings on a website with the following results.

\(C\)0.601.151.50
\(P\)49512001720
(i) Plot \(\ln P\) against \(\ln C\) for the three rings on the grid below. [2 marks]
Blank grid: ln C axis from −0.7 to 0.7 marked every 0.2 from −0.6 to 0.6; ln P axis with a broken scale near zero, marked 5.0, 6.0, 7.0 and 8.0
(ii) Explain which feature of the plot suggests that Raj’s belief may be correct. [1 mark]
(iii) Using the graph above, estimate the value of \(a\) and the value of \(n\). [4 marks]
(c) Explain the significance of \(a\) in this context. [1 mark]
(d) Raj wants to buy a ring with a brilliant-cut diamond of weight 2 carats.

Estimate the price of such a ring. [2 marks]

June 2020 Paper 2 Q7

AQACurrent spec2 marksLogs & ExponentialsModelling

7 The population of a country was 3.6 million in 1989.

It grew exponentially to reach 6 million in 2019.

Estimate the population of the country in 2049 if the exponential growth continues unchanged. [2 marks]

June 2019 Paper 1 Q10

AQACurrent spec9 marksModellingTrigonometry

10 On 18 March 2019 there were 12 hours of daylight in Inverness.

On 16 June 2019, 90 days later, there will be 18 hours of daylight in Inverness.

Jude decides to model the number of hours of daylight in Inverness, \(N\), by the formula\[N = A + B\sin t^\circ\]where \(t\) is the number of days after 18 March 2019.

(a)
(i) State the value that Jude should use for \(A\). [1 mark]
(ii) State the value that Jude should use for \(B\). [1 mark]
(iii) Using Jude’s model, calculate the number of hours of daylight in Inverness on 15 May 2019, 58 days after 18 March 2019. [1 mark]
(iv) Using Jude’s model, find how many days during 2019 will have at least 17.4 hours of daylight in Inverness. [4 marks]
(v) Explain why Jude’s model will become inaccurate for 2020 and future years. [1 mark]
(b) Anisa decides to model the number of hours of daylight in Inverness with the formula\[N = A + B\sin\left(\frac{360}{365}t\right)^\circ\]Explain why Anisa’s model is better than Jude’s model. [1 mark]

June 2019 Paper 2 Q10

AQACurrent spec10 marksLogs & ExponentialsModelling

10 As part of an experiment, Zena puts a bucket of hot water outside on a day when the outside temperature is 0°C.

She measures the temperature of the water after 10 minutes and after 20 minutes. Her results are shown below.

Time (minutes)1020
Temperature (degrees Celsius)3012

Zena models the relationship between \(\theta\), the temperature of the water in °C, and \(t\), the time in minutes, by\[\theta = A \times 10^{-kt}\]where \(A\) and \(k\) are constants.

(a) Using \(t = 0\), explain how the value of \(A\) relates to the experiment. [1 mark]
(b) Show that\[\log_{10}\theta = \log_{10} A - kt\] [1 mark]
(c) Using Zena’s results, calculate the values of \(A\) and \(k\). [4 marks]
(d) Zena states that the temperature of the water will be less than 1°C after 45 minutes.

Determine whether the model supports this statement. [3 marks]

(e) Explain why Zena’s model is unlikely to accurately give the value of \(\theta\) after 45 minutes. [1 mark]

June 2018 Paper 2 Q12

AQACurrent spec8 marksLogs & ExponentialsModelling

12 Trees in a forest may be affected by one of two types of fungal disease, but not by both.

The number of trees affected by disease A, \(n_{\mathrm{A}}\), can be modelled by the formula

\[n_{\mathrm{A}} = a\mathrm{e}^{0.1t}\]

where \(t\) is the time in years after 1 January 2017.

The number of trees affected by disease B, \(n_{\mathrm{B}}\), can be modelled by the formula

\[n_{\mathrm{B}} = b\mathrm{e}^{0.2t}\]

On 1 January 2017 a total of 290 trees were affected by a fungal disease.

On 1 January 2018 a total of 331 trees were affected by a fungal disease.

(a) Show that \(b = 90\), to the nearest integer, and find the value of \(a\). [3 marks]
(b) Estimate the total number of trees that will be affected by a fungal disease on 1 January 2020. [1 mark]
(c) Find the year in which the number of trees affected by disease B will first exceed the number affected by disease A. [3 marks]
(d) Comment on the long-term accuracy of the model. [1 mark]

June 2018 Paper 2 Q11

AQACurrent spec9 marksDifferentiationModelling

11 Rakti makes open-topped cylindrical planters out of thin sheets of galvanised steel.

She bends a rectangle of steel to make an open cylinder and welds the joint. She then welds this cylinder to the circumference of a circular base.

Open-topped cylinder of radius r and height h, with a thick vertical line marking the welded joint down the side

The planter must have a capacity of 8000 cm3

Welding is time consuming, so Rakti wants the total length of weld to be a minimum.

Calculate the radius, \(r\), and height, \(h\), of a planter which requires the minimum total length of weld.

Fully justify your answers, giving them to an appropriate degree of accuracy. [9 marks]

June 2018 Paper 1 Q8

AQACurrent spec8 marksLogs & ExponentialsModelling

8 Maxine measures the pressure, \(P\) kilopascals, and the volume, \(V\) litres, in a fixed quantity of gas.

Maxine believes that the pressure and volume are connected by the equation

\[P = cV^d\]

where \(c\) and \(d\) are constants.

Using four experimental results, Maxine plots \(\log_{10}P\) against \(\log_{10}V\), as shown in the graph below.

Graph of log10 P (vertical axis, 1.9 to 2.4, broken scale below 1.9) against log10 V (horizontal axis, −0.4 to 0) on a fine grid; four crosses lie on a straight line falling from about (−0.3, 2.4) through (−0.23, 2.3), the point A at about (−0.15, 2.18) and (−0.02, 2.0), the line meeting the vertical axis just below 2.0
(a) Find the value of \(P\) and the value of \(V\) for the data point labelled \(A\) on the graph. [2 marks]
(b) Calculate the value of each of the constants \(c\) and \(d\). [4 marks]
(c) Estimate the pressure of the gas when the volume is 2 litres. [2 marks]

June 2023 Paper 2 Q3

OCR ACurrent spec8 marksModellingTrigonometry

3 A Ferris wheel at a fairground rotates in a vertical plane. The height above the ground of a seat on the wheel is \(h\) metres at time \(t\) seconds after the seat is at its lowest point.

The height is given by the equation \(h = 15 - 14\cos(kt)^\circ\), where \(k\) is a positive constant.

(a)
(i) Write down the greatest height of a seat above the ground. [1]
(ii) Write down the least height of a seat above the ground. [1]
(b) Given that a seat first returns to its lowest point after 150 seconds, calculate the value of \(k\). [2]
(c) Determine for how long a seat is 20 metres or more above the ground during one complete revolution. Give your answer correct to the nearest tenth of a second. [4]

June 2022 Paper 1 Q6

OCR ACurrent spec11 marksLogs & ExponentialsModelling

6 During some research the size, \(P\), of a population of insects, at time \(t\) months after the start of the research, is modelled by the following formula.

\(P = 100\mathrm{e}^{t}\)

(a) Use this model to answer the following.
(i) Find the value of \(P\) when \(t = 4\). [1]
(ii) Find the value of \(t\) when the population is 9000. [2]
(b) It is suspected that a more appropriate model would be the following formula.

\(P = ka^{t}\) where \(k\) and \(a\) are constants.

(i) Show that, using this model, the graph of \(\log_{10} P\) against \(t\) would be a straight line. [2]

Some observations of \(t\) and \(P\) gave the following results.

\(t\)12345
\(P\)1005001800700019000
\(\log_{10} P\)2.002.703.263.854.28
(ii) On the grid below, draw a line of best fit for the data points \((t, \log_{10} P)\) given in the table. [2]
Blank grid with log10 P from 0 to 5 on the vertical axis and t from 0 to 6 on the horizontal axis
(iii) Hence estimate the values of \(k\) and \(a\). [4]

October 2021 Paper 1 Q6

OCR ACurrent spec3 marksModellingQuadratics

6 The power output, \(P\) watts, of a certain wind turbine is proportional to the cube of the wind speed \(v\,\mathrm{m\,s^{-1}}\).

When \(v = 3.6\), \(P = 50\).

Determine the wind speed that will give a power output of 225 watts. [3]

October 2021 Paper 1 Q5

OCR ACurrent spec8 marksDifferentiationModelling

5 The fuel consumption of a car, \(C\) miles per gallon, varies with the speed, \(v\) miles per hour. Jamal models the fuel consumption of his car by the formula

\(C = \frac{12}{5}v - \frac{3}{125}v^2\), for \(0 \leqslant v \leqslant 80\).

(a) Suggest a reason why Jamal has included an upper limit in his model. [1]
(b) Determine the speed that gives the maximum fuel consumption. [4]

Amaya’s car does more miles per gallon than Jamal’s car. She proposes to model the fuel consumption of her car using a formula of the form

\(C = \frac{12}{5}v - \frac{3}{125}v^2 + k\), for \(0 \leqslant v \leqslant 80\), where \(k\) is a positive constant.

(c) Give a reason why this model is not suitable. [1]
(d) Suggest a different change to Jamal’s formula which would give a more suitable model. [2]

October 2021 Paper 2 Q3

OCR ACurrent spec5 marksCo-ordinate GeometryModelling

3 Sam invested in a shares scheme. The value, £\(V\), of Sam’s shares was reported \(t\) months after investment.

  • Exactly 6 months after investment, the value of Sam’s shares was £2375.
  • Exactly 1 year after investment, the value of Sam’s shares was £2825.
(a) Using a straight-line model, determine an equation for \(V\) in terms of \(t\). [3]

Sam’s original investment in the scheme was £1900.

(b) Explain whether or not this fact supports the use of the straight-line model in part (a). [2]

October 2021 Paper 1 Q2

OCR ACurrent spec4 marksDifferentiationModelling

2 The number of people, \(n\), living in a small town is changing over time. In an attempt to predict the future growth of the town, a researcher uses the following model for \(n\) in terms of \(t\), where \(t\) is the time in years from the start of the research.

\(n = 12\,500 + \dfrac{5000}{t}\), for \(t \geqslant 1\)

Find the rate of change of \(n\) when \(t = 5\). [4]

October 2020 Paper 2 Q7

OCR ACurrent spec13 marksDifferentiationModelling

7

Triangular prism ABCDEF lying on rectangular base ACFD, with AC = 2x cm, CF = y cm, cross-section ABC and ridge BE at height x cm above the base

The diagram shows a model for the roof of a toy building. The roof is in the form of a solid triangular prism \(ABCDEF\). The base \(ACFD\) of the roof is a horizontal rectangle, and the cross-section \(ABC\) of the roof is an isosceles triangle with \(AB = BC\).

The lengths of \(AC\) and \(CF\) are \(2x\) cm and \(y\) cm respectively, and the height of \(BE\) above the base of the roof is \(x\) cm.

The total surface area of the five faces of the roof is \(600\ \text{cm}^2\) and the volume of the roof is \(V\ \text{cm}^3\).

(a) Show that \(V = kx(300 - x^2)\), where \(k = \sqrt{a} + b\) and \(a\) and \(b\) are integers to be determined. [6]
(b) Use differentiation to determine the value of \(x\) for which the volume of the roof is a maximum. [4]
(c) Find the maximum volume of the roof. Give your answer in \(\text{cm}^3\), correct to the nearest integer. [1]
(d) Explain why, for this roof, \(x\) must be less than a certain value, which you should state. [2]

June 2018 Paper 2 Q6

OCR ACurrent spec9 marksLogs & ExponentialsModelling

6 A pan of water is heated until it reaches \(100\,{}^\circ\text{C}\). Once the water reaches \(100\,{}^\circ\text{C}\), the heat is switched off and the temperature \(T\,{}^\circ\text{C}\) of the water decreases. The temperature of the water is modelled by the equation

\[T = 25 + a\mathrm{e}^{-kt},\]

where \(t\) denotes the time, in minutes, after the heat is switched off and \(a\) and \(k\) are positive constants.

(i) Write down the value of \(a\). [1]
(ii) Explain what the value of 25 represents in the equation \(T = 25 + a\mathrm{e}^{-kt}\). [1]

When the heat is switched off, the initial rate of decrease of the temperature of the water is \(15\,{}^\circ\text{C}\) per minute.

(iii) Calculate the value of \(k\). [3]
(iv) Find the time taken for the temperature of the water to drop from \(100\,{}^\circ\text{C}\) to \(45\,{}^\circ\text{C}\). [3]
(v) A second pan of water is heated, but the heat is turned off when the water is at a temperature of less than \(100\,{}^\circ\text{C}\). Suggest how the equation for the temperature as the water cools would be modified by this. [1]

June 2025 Paper 1 Q12

OCR MEICurrent spec13 marksLogs & ExponentialsModelling

12 A student dissolves 0.5 kg of salt in a bucket of water. Water leaks out of a hole in the bucket so the student lets fresh water flow in so that the bucket stays full.

They assume that the salty water remaining in the bucket mixes with the fresh water that flows in, so the concentration of salt is uniform throughout the bucket.

They model the mass \(M\) kg of salt remaining after \(t\) minutes by \(M = ak^t\) where \(a\) and \(k\) are constants.

(a) Show that the model for \(M\) can be rewritten in the form \(\log_{10} M = t\log_{10} k + \log_{10} a\). [1]

The student measures the concentration of salt in the bucket at certain times to estimate the mass of the salt remaining. The results are shown in the table below.

\(t\) minutes813213550
\(M\) kg0.40.30.20.10.05

The student uses this data and plots \(y = \log_{10} M\) against \(x = t\) using graph drawing software. The software gives \(y = -0.0214x - 0.2403\) for the equation of the line of best fit.

(b)
(i) Find the values of \(a\) and \(k\) that follow from the equation of the line. [3]
(ii) Interpret the value of \(k\) in context. [1]
(c) It is known that when \(t = 0\) the mass of salt in the bucket is 0.5 kg.

Comment on the accuracy when the model is used to estimate the initial mass of the salt. [2]
(d) Use the model to predict the value of \(t\) at which \(M = 0.01\) kg. [2]
(e) Rewrite the model for \(M\) in the form \(M = a\mathrm{e}^{-ht}\) where \(h\) is a constant to be determined. [2]
(f) Find the rate at which the mass of salt is decreasing when \(t = 10\). [2]

June 2024 Paper 1 Q11

OCR MEICurrent spec6 marksLogs & ExponentialsModelling

11 A student records the time a pendulum takes to swing for different lengths of pendulum.

The student decides to plot a graph of \(\log_{10} T\) against \(\log_{10} l\) where \(T\) is the time in seconds that the pendulum takes to return to its start position and \(l\) is the length in metres of the pendulum. They use a model for \(\log_{10} T\) in terms of \(\log_{10} l\) of the form \(\log_{10} T = \log_{10} k + n\log_{10} l\).

The student records the following data points.

\(\log_{10} l\)−0.0970.146
\(\log_{10} T\)0.2540.376
(a) Determine the values of \(k\) and \(n\) that best model the data. Give your values correct to 2 significant figures. [4]
(b) Using these values of \(k\) and \(n\), write the student’s model as an equation expressing \(T\) in terms of \(l\). [2]

June 2023 Paper 2 Q15

OCR MEICurrent spec7 marksModellingQuadratics

15 A family is planning a holiday in Europe. They need to buy some euros before they go. The exchange rate, \(y\), is the number of euros they can buy per pound. They believe that the exchange rate may be modelled by the formula

\(y = at^2 + bt + c\),

where \(t\) is the time in days from when they first check the exchange rate.

Initially, when \(t = 0\), the exchange rate is 1.14.

(a) Write down the value of \(c\). [1]

When \(t = 2\), \(y = 1.20\) and when \(t = 4\), \(y = 1.25\).

(b) Calculate the values of \(a\) and \(b\). [2]

The family will only buy their euros when their model predicts an exchange rate of at least 1.29.

(c) Determine the range of values of \(t\) for which, according to their model, they will buy their euros. [3]
(d) Explain why the family’s model is not viable in the long run. [1]

June 2023 Paper 1 Q10

OCR MEICurrent spec7 marksLogs & ExponentialsModelling

10 Layla invests money in the bank and receives compound interest. The amount £\(L\) that she has after \(t\) years is given by the equation \(L = 2800 \times 1.023^t\).

(a)
(i) State the amount she invests. [1]
(ii) State the annual rate of interest. [1]

Amit invests £3000 and receives 2% compound interest per year. The amount £\(A\) that he has after \(t\) years is given by the equation \(A = ab^t\).

(b) Determine the values of the constants \(a\) and \(b\). [2]
(c) Layla and Amit invest their money in the bank at the same time.

Determine the value of \(t\) for which Layla and Amit have equal amounts in the bank. Give your answer correct to 1 decimal place. [3]

June 2023 Paper 1 Q2

OCR MEICurrent spec3 marksModellingTrigonometry

2 The height of the first part of a rollercoaster track is \(h\) m at a horizontal distance of \(x\) m from the start. A student models this using the equation \(h = 17 + 15\cos 6x\), for \(0 \leqslant x \leqslant 40\), using the values of \(h\) given when their calculator is set to work in degrees.

(a) Find the height that the student’s model predicts when the horizontal distance from the start is 40 m. [1]
(b) The student argues that the model predicts that the rollercoaster track will achieve a maximum height of 32 m more than once because the cosine function is periodic.

Comment on the validity of the student’s argument. [2]

June 2022 Paper 1 Q8

OCR MEICurrent spec7 marksModellingQuadratics

8 A team of volunteers donates cakes for sale at a charity stall. The number of cakes that can be sold depends on the price. A model for this is \(y = 190 - 70x\), where \(y\) cakes can be sold when the price of a cake is £\(x\).

(a) Find how many cakes could be given away for free according to this model. [1]

The number of volunteers who are willing to donate cakes goes up as the price goes up. If the cakes sell for £1.20 they will donate 50 cakes, but if they sell for £2.40 they will donate 140 cakes. They use the linear model \(y = mx + c\) to relate the number of cakes donated, \(y\), to the price of a cake, £\(x\).

(b) Find the values of the constants \(m\) and \(c\) for which this linear model fits the two data points. [2]
(c) Explain why the model is not suitable for very low prices. [1]
(d) The team would like to sell all the cakes that they donate.

Find the set of possible prices that the cakes could have to achieve this. [3]

October 2021 Paper 1 Q11

OCR MEICurrent spec10 marksLogs & ExponentialsModelling

11 On the day that a new consumer product went on sale (day zero), a call centre received 1 call about it. On the 2nd day after day zero the call centre received 3 calls, and on the 10th day after day zero there were 200 calls.

Two models were proposed to model \(N\), the number of calls received \(t\) days after day zero.

Model 1 is a linear model \(N = mt + c\).

(a) Determine the values of \(m\) and \(c\) which best model the data for 2 days and 10 days after day zero. [3]
(b) State the rate of increase in calls according to model 1. [1]
(c) Explain why this model is not suitable when \(t = 1\). [1]

Model 2 is an exponential model \(N = \mathrm{e}^{0.53t}\).

(d) Verify that this is a good model for the number of calls when \(t = 2\) and \(t = 10\). [2]
(e) Determine the rate of increase in calls when \(t = 10\) according to model 2. [3]

October 2021 Paper 2 Q5

OCR MEICurrent spec7 marksLogs & ExponentialsModelling

5 In 2019 scientists developed a model for comparing the ages of humans and dogs.
According to the model,

\(Y = A\ln X + B\)

where \(X = \text{dog age in years}\) and \(Y = \text{human age in years}\).

For the model, it is known that when \(X = 1,\ Y = 31\) and when \(X = 12,\ Y = 71\).

(a) Find the value of \(B\). [1]
(b) Determine the value of \(A\), correct to the nearest whole number. [2]

Use the model, with the exact value of \(B\) and the value of \(A\) correct to the nearest whole number, to answer parts (c) and (d).

(c) Find the human age corresponding to a dog age of 20 years. [1]
(d) Determine the dog age corresponding to a human age of 120 years. [3]

October 2020 Paper 2 Q11

OCR MEICurrent spec10 marksLogs & ExponentialsModelling

11 A car is travelling along a stretch of road at a steady speed of 11 \(\text{m s}^{-1}\).

The driver accelerates, and \(t\) seconds after starting to accelerate the speed of the car, \(V\), is modelled by the formula

\(V = A + B\left(1 - \mathrm{e}^{-0.17t}\right)\).

When \(t = 3\), \(V = 13.8\).

(a) Find the values of \(A\) and \(B\), giving your answers correct to 2 significant figures. [3]

When \(t = 4\), \(V = 14.5\) and when \(t = 5\), \(V = 14.9\).

(b) Determine whether the model is a good fit for these data. [2]
(c) Determine the acceleration of the car according to the model when \(t = 5\), giving your answer correct to 3 decimal places. [2]

The car continues to accelerate until it reaches its maximum speed.

The speed limit on this road is 60 \(\text{km h}^{-1}\). All drivers who exceed this speed limit are recorded by a speed camera and automatically fined £100.

(d) Determine whether, according to the model, the driver of this car is fined £100. [3]

June 2019 Paper 1 Q11

OCR MEICurrent spec11 marksModellingSketching & Transforming Graphs

11 David puts a block of ice into a cool-box. He wishes to model the mass \(m\) kg of the remaining block of ice at time \(t\) hours later. He finds that when \(t = 5,\ m = 2.1\), and when \(t = 50,\ m = 0.21\).

(a) David at first guesses that the mass may be inversely proportional to time. Show that this model fits his measurements. [3]
(b) Explain why this model
(i) is not suitable for small values of \(t\), [1]
(ii) cannot be used to find the time for the block to melt completely. [1]

David instead proposes a linear model \(m = at + b\), where \(a\) and \(b\) are constants.

(c) Find the values of the constants for which the model fits the mass of the block when \(t = 5\) and \(t = 50\). [3]
(d) Interpret these values of \(a\) and \(b\). [2]
(e) Find the time according to this model for the block of ice to melt completely. [1]

June 2019 Paper 2 Q9

OCR MEICurrent spec10 marksLogs & ExponentialsModelling

9 In 2012 Adam bought a second hand car for £8500. Each year Adam has his car valued. He believes that there is a non-linear relationship between \(t\), the time in years since he bought the car, and \(V\), the value of the car in pounds. Fig. 9.1 shows successive values of \(V\) and \(\log_{10} V\).

\(t\)01234
\(V\)85006970572046903840
\(\log_{10} V\)3.933.843.763.673.58

Fig. 9.1

Adam uses a spreadsheet to plot the points \((t, \log_{10} V)\) shown in Fig. 9.1, and then generates a line of best fit for these points. The line passes through the points (0, 3.93) and (4, 3.58). A copy of his graph is shown in Fig. 9.2.

Graph of log10 V against t: five points from (0, 3.93) to (4, 3.58) joined by a straight line of best fit
Fig. 9.2
(a) Find an expression for \(\log_{10} V\) in terms of \(t\). [3]
(b) Find a model for \(V\) in the form \(V = A \times b^t\), where \(A\) and \(b\) are constants to be determined. Give the values of \(A\) and \(b\) correct to 2 significant figures. [3]

In 2017 Adam’s car was valued at £3150.

(c) Determine whether the model is a good fit for this data. [1]

A company called Webuyoldcars pays £500 for any second hand car. Adam decides that he will sell his car to this company when the annual valuation of his car is less than £500.

(d) According to the model, after how many years will Adam sell his car to Webuyoldcars? [3]

June 2018 Paper 2 Q12

OCR MEICurrent spec10 marksLogs & ExponentialsModelling

12 In an experiment 500 fruit flies were released into a controlled environment. After 10 days there were 650 fruit flies present.

Munirah believes that \(N\), the number of fruit flies present at time \(t\) days after the fruit flies are released, will increase at the rate of 4.4% per day. She proposes that the situation is modelled by the formula \(N = Ak^t\).

(i) Write down the values of \(A\) and \(k\). [2]
(ii) Determine whether the model is consistent with the value of \(N\) at \(t = 10\). [2]
(iii) What does the model suggest about the number of fruit flies in the long run? [1]

Subsequently it is found that for large values of \(t\) the number of fruit flies in the controlled environment oscillates about 750. It is also found that as \(t\) increases the oscillations decrease in magnitude.

Munirah proposes a second model in the light of this new information.

\[N = 750 - 250 \times \mathrm{e}^{-0.092t}.\]
(iv) Identify three ways in which this second model is consistent with the known data. [3]
(v)
(A) Identify one feature which is not accounted for by the second model. [1]
(B) Give an example of a mathematical function which needs to be incorporated in the model to account for this feature. [1]

June 2018 Paper 1 Q11

OCR MEICurrent spec13 marksLogs & ExponentialsModelling

11 The intensity of the sun’s radiation, \(y\) watts per square metre, and the average distance from the sun, \(x\) astronomical units, are shown in Fig. 11 for the planets Mercury and Jupiter.

\(x\)\(y\)
Mercury0.307514 400
Jupiter4.95055.8

Fig. 11

The intensity \(y\) is proportional to a power of the distance \(x\).

(i) Write down an equation for \(y\) in terms of \(x\) and two constants. [1]
(ii) Show that the equation can be written in the form \(\ln y = a + b\ln x\). [2]
(iii) Complete the table below for \(\ln x\) and \(\ln y\) correct to 4 significant figures. [2]
\(\ln x\)\(\ln y\)
Mercury
Jupiter
(iv) Use the values from part (iii) to find \(a\) and \(b\). [3]
(v) Hence rewrite your equation from part (i) for \(y\) in terms of \(x\), using suitable numerical values for the constants. [2]
(vi) Sketch a graph of the equation found in part (v). [2]
(vii) Earth is 1 astronomical unit from the sun. Find the intensity of the sun’s radiation for Earth. [1]

June 2024 Unit 1 Q10

WJECCurrent spec6 marksDifferentiationModelling

10. Water is being emptied out of a sink. The depth of water, \(y\) cm, at time \(t\) seconds, may be modelled by

\[y=t^2-14t+49\qquad\qquad 0\leqslant t\leqslant7.\]

(a) Find the value of \(t\) when the depth of water is 25 cm. [3]
(b) Find the rate of decrease of the depth of water when \(t=3\). [3]

June 2023 Unit 1 Q14

WJECCurrent spec6 marksLogs & ExponentialsModelling

14.

(a) Two variables, \(x\) and \(y\), are such that the rate of change of \(y\) with respect to \(x\) is proportional to \(y\). State a model which may be appropriate for \(y\) in terms of \(x\). [1]
(b) The concentration, \(Y\) units, of a certain drug in a patient’s body decreases exponentially with respect to time. At time \(t\) hours the concentration can be modelled by \(Y=A\mathrm{e}^{-kt}\), where \(A\) and \(k\) are constants.

A patient was given a dose of the drug that resulted in an initial concentration of 5 units.

(i) After 4 hours, the concentration had dropped to 1·25 units. Show that \(k=0{\cdot}3466\), correct to four decimal places. [2]
(ii) The minimum effective concentration of the drug is 0·6 units. How much longer would it take for the drug concentration to drop to the minimum effective level? [3]

June 2022 Unit 1 Q8

WJECCurrent spec7 marksLogs & ExponentialsModelling

8.

(a) The graph \(G\) shows the relationship between the variables \(y\) and \(x\), where \(y\propto x\). Sketch the graph \(G\). [1]
(b) Mary and Jeff work for a company which pays its employees by hourly rates. Mary’s hourly rate is twice Jeff’s hourly rate. On a certain day, Jeff worked three times as long as Mary and was paid £120. Calculate Mary’s earnings on that day. [3]
(c) Atmospheric pressure, \(P\) units, decreases as the height, \(H\) metres, above sea level increases. The rate of decrease is 12% for every 1000 m. At sea level, the pressure \(P\) is 1013 units. Write down the model for \(P\) in terms of \(H\) and find the pressure at the top of Mount Everest, which is 8848 m above sea level. [3]