June 2019 Paper 1 Q11
11 David puts a block of ice into a cool-box. He wishes to model the mass \(m\) kg of the remaining block of ice at time \(t\) hours later. He finds that when \(t = 5,\ m = 2.1\), and when \(t = 50,\ m = 0.21\).
David instead proposes a linear model \(m = at + b\), where \(a\) and \(b\) are constants.
| Scheme | Marks | AO |
|---|---|---|
| \(m = \dfrac{k}{t}\), so \(t = 5,\ m = 2.1 \Rightarrow k = 10.5\) | M1 | 2.1 |
| When \(t = 50,\ m = \dfrac{10.5}{50} = 0.21\), oe | M1 | 2.1 |
| EITHER The model fits the measurements because the prediction agrees with given value OR The model fits the measurements because the same value of \(k\) is obtained in each case | A1 | 2.2a |
| [3] |
Notes
M1: Using algebraic expression to represent proportionality and one pair of values in attempt to find \(k\); oe with \(t = 50,\ m = 0.21\)
M1: Uses the model to predict the value of \(m\) for the other value of \(t\), or uses the other pair of values to check the value of \(k\)
A1: Makes suitable statement about consistency of results e.g. \(\therefore\ m = \dfrac{10.5}{t}\)
Alternative argument
| Scheme | Marks | AO |
|---|---|---|
| When the value of \(t\) is multiplied by 10, the value of \(m\) is divided by 10 | M2 | |
| So [consistent with the model that] mass is inversely proportional to time. | A1 |
M2: Argument in words need not reference the constant of proportionality
A1: Must make a clear conclusion about inverse proportionality
| Scheme | Marks | AO |
|---|---|---|
| (i) When \(t\) is small, \(m = \dfrac{10.5}{t}\) is large, so the mass will not be modelled correctly. | B1 | 3.5a |
| (ii) Melts completely when \(m = 0\), but \(t = \dfrac{10.5}{0}\) is not defined so the model cannot be used | B1 | 3.5a |
| [2] |
Notes
B1 (i): Any suitable comment that identifies a problem at \(t = 0\) or as \(t \to 0\)
B1 (ii): Any suitable comment explaining that the model will not give a time for \(m = 0\). Allow for “the model does not give a time for which \(m = 0\)” oe
| Scheme | Marks | AO |
|---|---|---|
| Substitute \(t = 5,\ m = 2.1 \Rightarrow 2.1 = 5a + b\) | M1 | 3.3 |
| Substitute \(t = 50,\ m = 0.21 \Rightarrow 0.21 = 50a + b\) | M1 | 1.1a |
| Solving simultaneously: \(a = -0.042,\ b = 2.31\) | A1 | 1.1 |
| [3] |
Notes
M1: Uses either data point to form equation
M1: Uses the other data point to find 2nd equation and solve simultaneously
A1: Both values required. Solution may be BC
Alternative method
| Scheme | Marks | AO |
|---|---|---|
| gradient of line joining points (5, 2.1) and (50, 0.21) \(\dfrac{2.1 - 0.21}{5 - 50} = -0.042\) | M1 | |
| So line is of the form \(y - 2.1 = -0.042(x - 5)\) | M1 | |
| \(y = -0.042x + 2.31\) | A1 |
M1: Attempt to find gradient
M1: Uses either data point to complete the equation
A1: Award for the correct equation without reference to \(a\) and \(b\)
| Scheme | Marks | AO |
|---|---|---|
| \(a\) is the rate at which ice melts: 0.042 kg of ice is lost per hour | B1 | 3.3 |
| \(b\) is the initial mass of the block: 2.31 kg | B1 | 3.3 |
| [2] |
Notes
B1: Must refer to the value found; FT their negative \(a\)
B1: FT their positive \(b\)
If no reference is made to the numerical values, allow SC1 for ‘\(a\) is the rate at which ice melts and \(b\) is the initial mass of the block’ oe
| Scheme | Marks | AO |
|---|---|---|
| \(m = 0 \Rightarrow 0 = -0.042t + 2.31 \Rightarrow t = \dfrac{2.31}{0.042} = 55\) so time for block to melt is 55 hours | B1 | 3.4 |
| [1] |
Notes
B1: FT their \(a\) and \(b\) only if \(t\) is positive