June 2019 Paper 1 Q8
8 A cylindrical tank is initially full of water. There is a small hole at the base of the tank out of which the water leaks.
The height of water in the tank is \(x\) m at time \(t\) seconds. The rate of change of the height of water may be modelled by the assumption that it is proportional to the square root of the height of water.
When \(t = 100\), \(x = 0.64\) and, at this instant, the height is decreasing at a rate of 0.0032 m s−1.
| Scheme | Marks | AO |
|---|---|---|
| \(\dfrac{\mathrm{d}x}{\mathrm{d}t} = k\sqrt{x}\) | B1* | 3.3 |
| \(-0.0032 = k\sqrt{0.64}\) so \(k = -0.004\) hence \(\dfrac{\mathrm{d}x}{\mathrm{d}t} = -0.004\sqrt{x}\) A.G. | B1d* | 3.3 |
| [2] |
Notes
B1*: Set up a correct differential equation.
Allow \(-k\)
B1d*: Obtain correct differential equation www.
Or \(k = 0.004\) from \(-k\)
Must use \(-0.0032\) when finding \(k\)
B0 if \(k = 0.004\), even if then comment about ‘decreasing’ and sign changed
| Scheme | Marks | AO |
|---|---|---|
| \(\displaystyle\int -0.004\,\mathrm{d}t = \int x^{-\frac{1}{2}}\,\mathrm{d}x\) | M1* | 1.1a |
| \(-0.004t = 2x^{\frac{1}{2}} + c\) | A1 | 1.1 |
| \(-0.004 \times 100 = 2\sqrt{0.64} + c\) \(c = -2\) | M1d* | 3.4 |
| \(2\sqrt{x} = 2 - 0.004t\) \(x = (1 - 0.002t)^2\) | A1 | 1.1 |
| [4] |
Notes
M1*: Separate variables and attempt integration.
Condone d\(x\), d\(t\) and/or integral sign not being explicit
Could instead invert both sides of equation
Increase by 1 in both of their powers
A1: Correct integral – could still be in terms of \(k\).
Condone no \(+ c\)
Any correct equation eg \(t = -500\sqrt{x} + c\)
M1d*: Use \(t = 100\), \(x = 0.64\) to find \(c\).
Substitute given values into their general solution and attempt \(c\)
NB check method carefully for their equation and the position of their \(c\)
A1: Correct equation.
Any equiv as long as \(x\) in terms of \(t\)
ISW if correct equation subsequently spoilt
| Scheme | Marks | AO |
|---|---|---|
| when \(x = 0\), \(t = 500\) | M1 | 1.1 |
| so tank will be empty after 500 seconds | A1 | 3.4 |
| [2] |
Notes
M1: Use \(x = 0\) to attempt a value for \(t\).
Must be using \(x = 0\) in their particular solution, with a non-zero value for \(c\)
A1: Units needed.
Must come from using a correct equation
Allow 8 mins 20 secs, \(8.\dot{3}\) mins or 8.33 mins