June 2019 Paper 1 Q15
15
(a) At time \(t\) hours after a high tide, the height, \(h\) metres, of the tide and the velocity, \(v\) knots, of the tidal flow can be modelled using the parametric equations\[v = 4 - \left(\frac{2t}{3} - 2\right)^2\]\[h = 3 - 2\sqrt[3]{t - 3}\]
High tides and low tides occur alternately when the velocity of the tidal flow is zero.
A high tide occurs at 2 am.
(i) Use the model to find the height of this high tide. [1 mark]
(ii) Find the time of the first low tide after 2 am. [3 marks]
(iii) Find the height of this low tide. [1 mark]
(b) Use the model to find the height of the tide when it is flowing with maximum velocity. [3 marks]
(c) Comment on the validity of the model. [2 marks]
| Scheme | Marks | AO |
|---|---|---|
| (i) Uses model with t=0 to find correct value of h AWRT 5.9 | B1 | AO3.4 |
| (ii) Uses v=0 to set up quadratic equation for t | M1 | AO3.4 |
| Obtains t = 6 PI correct answer | A1 | AO1.1b |
| Interprets their lowest positive solution correctly NMS can score 3 | A1F | AO3.2a |
| (iii) Obtains correct h for their positive t provided h < 5.88 Accept 0.12 If given to more decimal places AWFW 0.115 to 0.116 FT their t allow negative h | B1F | AO3.4 |
Typical solution
(i)
5.88metres
(ii)
\[0 = 4 - \left(\frac{2t}{3} - 2\right)^2\]\[t = 6\]8 am
(iii)
0.12m
| Scheme | Marks | AO |
|---|---|---|
| Identifies t=3 (for maximum velocity) | B1 | AO3.1b |
| Substitutes their t into model for h PI their answer | M1 | 3.4 |
| Finds correct height with units | A1 | 3.2a |
Typical solution
\[t = 3\]\[h = 3 - 2\sqrt[3]{3 - 3}\]\(h =\) 3 metres
| Scheme | Marks | AO |
|---|---|---|
| Explains that the validity of the model is limited by time. | B1 | 3.5b |
| Explains that the height continues to decrease after 6 hours (or after the first cycle or first low tide). Or explains there are no other times when v=0 | B1 | 3.5a |
| (10 marks) |
Typical solution
The model breaks down after one cycle of the tide.
After 6 hours the model shows the height continues to decrease.