June 2020 Paper 3 Q5
5 The number of radioactive atoms, \(N\), in a sample of a sodium isotope after time \(t\) hours can be modelled by
\[N = N_0\mathrm{e}^{-kt}\]where \(N_0\) is the initial number of radioactive atoms in the sample and \(k\) is a positive constant.
The model remains valid for large numbers of atoms.
Determine the number of days required for at least 90% of the number of atoms in the original sample to decay. [5 marks]
Give your answer to two significant figures. [2 marks]
| Scheme | Marks | AO |
|---|---|---|
| Substitutes \(t = 15.9\) hours and \(N = \dfrac{N_0}{2}\) in the model to find \(k\) OE PI by correct value of \(k\) | M1 | 3.4 |
| Obtains correct \(k\) AWFW [0.043, 0.044] or \(-\dfrac{\ln(0.5)}{15.9}\) | A1 | 1.1b |
| Substitutes their value of \(k\) and \(N = 0.1N_0\) in the model to find \(t\) OE | M1 | 3.4 |
| Solves their equation correctly to find their \(t\) AWFW [52.3, 53.6] if correct \(k\) used | M1 | 1.1a |
| Obtains correct \(t\) in days AWRT 2.2 days Accept [2 days 4 hours, 2 days 6 hours] or 3 days Condone 2 days if 2.2 days seen | A1 | 3.2a |
| (5) |
Typical solution
\[\frac{N_0}{2} = N_0e^{-15.9k}\]\[k = 0.0436\]\[0.1 = e^{-0.0436t}\]\[t = 52.8 \text{ hours}\]\(t\) = 2.2 days
| Scheme | Marks | AO |
|---|---|---|
| Substitutes \(t\) = 24x7 or 168 and their value of \(k\) in the model. Condone omission of \(N\) or \(N_0\) or use of \(N_0\) = 1 or 100 PI by [0.000616, 0.00073] or correct answer | M1 | 3.4 |
| Obtains correct percentage AWFW [0.0616, 0.073] ISW | A1 | 3.2a |
| (2) |
Typical solution
\[N = N_0e^{-0.0436 \times 168}\]\[= N_0 \times 0.000658\ldots\]0.066%
| Scheme | Marks | AO |
|---|---|---|
| Gives a sensible reason relating continuous model for discrete data OE | E1 | 3.2b |
| (1) |
Typical solution
The model is continuous but the number of atoms is discrete
| Scheme | Marks | AO |
|---|---|---|
| Explains that the number of atoms will eventually become small or explains that the model will eventually predict less than one atom but never zero atoms OE | E1 | 3.5a |
| (1) | ||
| (9 marks) |
Typical solution
As \(t\) gets large the number of atoms predicted by the model will become small so the model will no longer be accurate.