June 2019 Paper 3 Q14
14
The questions in this section refer to the article on the Insert. You should read the article before attempting the questions.
The relevant parts of the article “Modelling a tube” are reproduced below; the line numbers are those printed on the Insert.
Line 35
Calculating the volumeLines 36–37
Finding the area of the cross-section shown in Fig. C3.2 and using \(ry + hx = hr\) gives the cross-sectional area in terms of \(y\) as \(\dfrac{\pi r^2}{h^2}(h^2 - y^2)\).Lines 38–40
Imagine slicing the tube into thin horizontal slices, with cross-section as shown in Fig. C3.2 and thickness \(\delta y\). The volume of the tube is given by \(\displaystyle\sum_0^h \frac{\pi r^2}{h^2}(h^2 - y^2)\,\delta y\); since \(r\) and \(h\) are constants for the tube, this can be written as \(\displaystyle\frac{\pi r^2}{h^2}\sum_0^h (h^2 - y^2)\,\delta y\).Lines 41–42
Taking the limit as \(\delta y \to 0\) and evaluating the resulting integral gives \(V = \frac{2}{3}\pi r^2 h\). This is less than the volume of the cylinder, \(\pi r^2 h\), as expected.
| Scheme | Marks | AO |
|---|---|---|
| \(\displaystyle\int_0^h (h^2 - y^2)\,\mathrm{d}y\) | B1 | 1.1 |
| [1] |
Notes
B1: Condone \(\mathrm{d}y\) missing or as \(\delta y\) but nothing else
Condone integration started provided seen or used in 14(b)
| Scheme | Marks | AO |
|---|---|---|
| \(V = \dfrac{\pi r^2}{h^2}\displaystyle\int_0^h (h^2 - y^2)\,\mathrm{d}y\) | M1 | 2.2a |
| \(\dfrac{\pi r^2}{h^2}\left[h^2y - \dfrac{y^3}{3}\right]_0^h\) | M1 | 1.1a |
| \(\dfrac{\pi r^2}{h^2}\left(h^3 - \dfrac{h^3}{3}\right)\) \(= \dfrac{2}{3}\pi r^2 h\) | A1 | 2.1 |
| [3] |
Notes
M1: Multiplying their integral from 14a by \(\dfrac{\pi r^2}{h^2}\) May be at a later stage
M1: Integration (one term correct condone omission of \(\dfrac{\pi r^2}{h^2}\))
A1: Convincing completion (answer given)