June 2018 Paper 3 Q9
9 A uniform plank \(AB\) has weight 100 N and length 4 m. The plank rests horizontally in equilibrium on two smooth supports \(C\) and \(D\), where \(AC = x\) m and \(CD = 0.5\) m (see diagram).

The magnitude of the reaction of the support on the plank at \(C\) is 75 N. Modelling the plank as a rigid rod, find
A stone block, which is modelled as a particle, is now placed at the end of the plank at \(B\) and the plank is on the point of tilting about \(D\).
| Scheme | Marks | AO |
|---|---|---|
| 25 N | B1 | 3.4 |
| [1] |
| Scheme | Marks | AO |
|---|---|---|
| \(2(100) = 75x + (x + 0.5)(25)\) | M1 A1ft | 3.3 1.1 |
| \(x = 1.875\) | A1 | 1.1 |
| [3] |
Notes
M1: eg moments about \(A\) – correct number of terms
A1ft: Follow through their 25 only
| Scheme | Marks | AO |
|---|---|---|
| \((x + 0.5 - 2)(100) = W(4 - 0.5 - x)\) | M1 A1ft | 3.3 1.1 |
| \(W = 23.1\) N | A1 | 1.1 |
| [3] |
Notes
M1: moments about \(D\) – correct number of terms – oe (leading to an equation in \(W\))
A1ft: Follow through their \(x\) only
A1: Accept 23 or better (23.076923…)
| Scheme | Marks | AO |
|---|---|---|
| Modelling the stone as a particle assumes that the weight of the stone block acts exactly at \(B\) therefore the block’s dimensions (or the distribution of the mass of the block) have not been taken into consideration | B1 | 3.5b |
| [1] |
Notes
B1: Accept ‘uniform’
| Scheme | Marks | AO |
|---|---|---|
| Modelling the plank as a rigid rod assumes that the plank remains in a straight line and does not bend | B1 | 3.5b |
| [1] |