October 2020 Paper 2 Q9
9. A quantity of ethanol was heated until it reached boiling point.
The temperature of the ethanol, \(\theta\)°C, at time \(t\) seconds after heating began, is modelled by the equation\[\theta = A - B\mathrm{e}^{-0.07t}\]where \(A\) and \(B\) are positive constants.
Given that
- the initial temperature of the ethanol was 18°C
- after 10 seconds the temperature of the ethanol was 44°C
Ethanol has a boiling point of approximately 78°C
| Scheme | Marks | AO |
|---|---|---|
| \(t = 0,\ \theta = 18 \Rightarrow 18 = A - B\) or \(t = 10,\ \theta = 44 \Rightarrow 44 = A - B\mathrm{e}^{-0.7}\) | M1 | 3.1b |
| \(t = 0,\ \theta = 18 \Rightarrow 18 = A - B\) and \(t = 10,\ \theta = 44 \Rightarrow 44 = A - B\mathrm{e}^{-0.7}\) and \(\Rightarrow A = \ldots, B = \ldots\) | M1 | 3.1a |
| At least one of: \(A = 69.6\), \(B = 51.6\) but allow awrt 70/awrt 52 | A1 M1 on EPEN | 1.1b |
| \(\theta = 69.6 - 51.6\mathrm{e}^{-0.07t}\) | A1 | 3.3 |
| (4) |
Notes
M1: Makes the first key step in the solution of the problem. Substitutes \(t = 0\) and \(\theta = 18\) or \(t = 10\) and \(\theta = 44\) into the equation of the model to obtain an equation connecting \(A\) and \(B\).
Note that \(18 = A - B\mathrm{e}^0\) scores M0 unless \(18 = A - B\) is seen or implied later.
If they do not obtain an equation in \(A\) and \(B\) using the first conditions e.g. they have \(18 = A - 1\) then they can score this mark if they substitute \(A = 19\) directly into \(44 = A - B\mathrm{e}^{-0.7}\) as an equation in \(A\) and \(B\) is implied.
M1: Substitutes \(t = 0\) and \(\theta = 18\) and \(t = 10\) and \(\theta = 44\) to obtain 2 equations connecting \(A\) and \(B\) and then proceeds to solves their equations in \(A\) and \(B\) simultaneously to obtain values for both constants. Do not be too concerned with the processing as long as values for \(A\) and \(B\) are obtained.
A1(M1 on EPEN): For \(A =\) awrt 70 or \(B =\) awrt 52
A1: For \(\theta = 69.6 - 51.6\mathrm{e}^{-0.07t}\) Must be a fully correct equation as shown but allow recovery if seen in (b).
Note that some candidates evaluate \(\mathrm{e}^0\) as 0 and so obtain \(A = 18\) and then write \(44 = 18 - B\mathrm{e}^{-0.7}\) and solve for \(B\).
Such attempts can score M1M0A0A0 only.
| Scheme | Marks | AO |
|---|---|---|
| The maximum temperature is “69.6”(°C) (according to the model) (The model has an) upper limit of “69.6”(°C) (The model suggests that) the boiling point is “69.6”(°C) | B1ft | 3.4 |
| Model is not appropriate as 69.6(°C) is much lower than 78(°C) | B1ft | 3.5a |
| (2) | ||
| (6 marks) |
Notes
B1ft: Identifies \(A\) as the boiling point/maximum temperature in the model. Follow through their \(A\).
B1ft: Makes a valid conclusion (valid/not valid, good/not good etc.) that refers to the 78 and includes a reference to a significant/large difference
Alternative provided their \(A \lt 78\)
B1ft: \(\theta = 69.6 - 51.6\mathrm{e}^{-0.07t} = 78 \Rightarrow 51.6\mathrm{e}^{-0.07t} = 69.6 - 78 = -8.4\)
\(\Rightarrow \mathrm{e}^{-0.07t} = -\dfrac{7}{43}\) and \(\ln\left(-\dfrac{7}{43}\right)\) and makes a reference to the fact that the equation cannot be solved or e.g. cannot take log of a negative number. You can condone numerical slips in the calculation.
B1ft: Model is not appropriate as 69.6(°C) is much lower than 78(°C)
Minimum for both marks: The model is not appropriate as “69.6”(°C) is much lower than 78(°C)
Note that these marks are not available if their equation is solvable. Note also that B0B1 is not possible.