June 2018 Paper 3 Q9
9 Helen is creating a mosaic pattern by placing square tiles next to each other along a straight line.

The area of each tile is half the area of the previous tile, and the sides of the largest tile have length \(w\) centimetres.
Show that, no matter how many tiles are in the pattern, the total length of the series of tiles will be less than \(3.5w\). [4 marks]
Explain how you could refine the model used in part (b) to account for the 3 millimetre gap, and state how the total length of the series of tiles will be affected. [2 marks]
| Scheme | Marks | AO |
|---|---|---|
| Obtains correct length \(\dfrac{w}{\sqrt{2}} = \dfrac{\sqrt{2}w}{2}\) ACF | B1 | AO1.1b |
Typical solution
\[\frac{w}{\sqrt{2}}\]| Scheme | Marks | AO |
|---|---|---|
| Models the lengths as a geometric sequence | M1 | AO3.3 |
| Finds the sum to infinity provided their \(r \lt 1\) | M1 | AO1.1a |
| Uses their model to obtain the correct sum in terms of \(w\) | A1 | AO3.4 |
| Compares their sum with \(3.5w\) | E1 | AO2.4 |
Typical solution
\(a = w\) and \(r = \dfrac{1}{\sqrt{2}}\)
\[S_\infty = \frac{w}{1 - \frac{1}{\sqrt{2}}}\]\[\approx 3.41w \lt 3.5w\]| Scheme | Marks | AO |
|---|---|---|
| Explains that the model would have to include an additional 3 mm for each tile | E1 | AO3.5c |
| Explains that the total length will not have an upper limit Or The total length may now exceed \(3.5w\) | E1 | AO3.5a |
| (7 marks) |
Typical solution
The total length will now include an additional 3 mm for each tile.
The total length will not have an upper limit.