Your progress
Ticks are kept only in this browser: clearing your browsing data or changing device loses them. · ·

June 2019 Paper 3 Q12

OCR MEICurrent spec2 marksCo-ordinate GeometryModelling

12

The questions in this section refer to the article on the Insert. You should read the article before attempting the questions.

The relevant parts of the article “Modelling a tube” are reproduced below; the line numbers are those printed on the Insert.

Lines 18–20
Taking the \(y\)-axis as the axis of symmetry of the tube and looking at the tube from the side, as shown in Fig. C2, means that the side width of the tube is \(2x\) at height \(y\).

Line 21
When \(y = 0\), \(x = r\) and when \(y = h\), \(x = 0\).

Lines 22–24
Assuming that the relationship between \(x\) and \(y\) is linear means that the side width decreases at a constant rate as \(y\) increases; this leads to \(ry + hx = hr\).

Fig. C2: side view of the tube on axes with origin O; the tube is a tall thin shape symmetrical about the y-axis, its right-hand edge a straight line from (r, 0) on the x-axis to (0, h) on the y-axis
Fig. C2

Show that the equation of the line in Fig. C2 is \(ry + hx = hr\), as given in line 24. [2]