June 2019 Paper 3 Q8
8 A particle \(P\) projected from a point \(O\) on horizontal ground hits the ground after 2.4 seconds.
The horizontal component of the initial velocity of \(P\) is \(\frac{5}{3}d\text{ m s}^{-1}\).
\(P\) just clears a vertical wall which is situated at a horizontal distance \(d\text{ m}\) from \(O\).
The speed of \(P\) as it passes over the wall is \(16\text{ m s}^{-1}\).
| Scheme | Marks | AO |
|---|---|---|
| \(s = 4d\) | B1 | 1.1 |
| [1] |
| Scheme | Marks | AO |
|---|---|---|
| \(2.4U - \frac{1}{2}g \times 2.4^2 = 0\) | M1 | 3.3 |
| \(U = 11.76\text{ m s}^{-1}\) | A1 | 1.1 |
| [2] |
Notes
M1: Use of \(s = ut + \frac{1}{2}at^2\) correctly with \(s = 0\), \(a = \pm g\) and time equal to 2.4 or \(v = u + at\) with \(t = 1.2\), \(v = 0\) and \(a = \pm g\)
oe use of other suvat equation(s) but must be a complete method to find \(U\)
A1: Accept \(1.2g\) or awrt 11.8 (accept \(-11.76\))
From \(-g\)
| Scheme | Marks | AO |
|---|---|---|
| \(d = \left(\frac{5}{3}d\right)t\) | B1 | 1.1 |
| \(h = Ut - \frac{1}{2}gt^2\) | M1 | 3.3 |
| \(h = 5.292\text{ m}\) | A1 | 1.1 |
| [3] |
Notes
B1: oe - where \(t\) is the time for \(P\) to reach the wall
e.g. \(t = 0.6\)
M1: Use of \(s = ut + \frac{1}{2}at^2\) correctly with \(a = \pm g\) and their \(U\), \(t\) \(\left(h = 11.76(0.6) - 0.5(9.8)(0.6)^2\right)\)
M0 if their \(t\) is 2.4 or 1.2 or if their \(U\) is \(5d/3\) (or in terms of \(d\)), M0 if \(t = \mathrm{f}(d)\)
A1: Accept 5.29
Not 5.30
| Scheme | Marks | AO |
|---|---|---|
| \(v_1 = U - gt\) or \(v_1^2 = U^2 - 2gh\) | M1* | 3.3 |
| \(\sqrt{\left(\frac{5}{3}d\right)^2 + (\text{‘}U\text{’} - 9.8 \times \text{‘}t\text{’})^2}\ (= 16)\) | M1dep* | 3.4 |
| \(\sqrt{\left(\frac{5}{3}d\right)^2 + (\text{‘}11.76\text{’} - 9.8 \times 0.6)^2} = 16\) | A1ft | 1.1 |
| \(d = 8.93\) | A1 | 1.1 |
| [4] |
Notes
M1*: Use of a correct suvat equation(s) to find the vertical speed \(v_1\) at the top of the wall using either their \(U\) and \(t\) or their \(U\) and \(h\)
For reference: (\(v_1 = 11.76 - g(0.6)\) or \(v_1^2 = 11.76^2 - 2g(5.292)\)) - may be seen in expression for speed
For reference \(v_1 = 5.88\)
M0 if vertical speed or \(U\) is in terms of \(d\)
M1dep*: Setting up an expression of the correct form for the speed or the speed squared in terms of \(d\) only (using their \(v_1\))
A1ft: 'Correct' equation in \(d\) following through their value for \(U\) (and \(h\)) only
All other terms must be correct
A1: Accept 8.92 (from using 11.8) www
8.928 225 80…