June 2020 Paper 1 Q16
16 A simple lifting mechanism comprises a light inextensible wire which is passed over a smooth fixed pulley.
One end of the wire is attached to a rigid triangular container of mass 2 kg, which rests on horizontal ground.
A load of \(m\) kg is placed in the container.
The other end of the wire is attached to a particle of mass 5 kg, which hangs vertically downwards.
The mechanism is initially held at rest as shown in the diagram below.

The mechanism is released from rest, and the container begins to move upwards with acceleration \(a\) m s−2
The wire remains taut throughout the motion.
[4 marks]
The load reaches a height of 2 metres above the ground 1 second after it is released.
Find the mass of the load. [4 marks]
| Scheme | Marks | AO |
|---|---|---|
| Models the motion of the container and load with at least one side of the equation correct. | M1 | 3.3 |
| Forms fully correct equation | A1 | 1.1b |
| Forms fully correct equation for particle | B1 | 3.3 |
| Completes a rigorous argument by eliminating \(T\) and rearranging to express \(a\) in terms of \(m\). AG | R1 | 2.1 |
| (4) |
Typical solution
\[T - (m + 2)g = (m + 2)a\]\[5g - T = 5a\]\[5g - (m + 2)g = (5 + 2 + m)a\]\[(3 - m)g = (7 + m)a\]\[\therefore a = \left(\frac{3 - m}{m + 7}\right)g\]| Scheme | Marks | AO |
|---|---|---|
| Deduces correct limits Condone \(0 \leqslant m \lt 3\) | B1 | 2.2a |
| (1) |
Typical solution
\[0 \lt m \lt 3\]| Scheme | Marks | AO |
|---|---|---|
| Uses appropriate constant acceleration equation to find the acceleration | M1 | 3.4 |
| Calculates correct value for \(a\) | A1 | 1.1b |
| Forms equation for \(a\) in terms of \(m\) using their \(a\) value | M1 | 3.4 |
| Solves to find \(m\). AWRT 0.10 Condone 0.1 | A1 | 3.2a |
| (4) |
Typical solution
\[s = ut + \frac{1}{2}at^2\]Using \(s = 2\), \(u = 0\) and \(t = 1\)
\[a = 4\]\[4 = \left(\frac{3 - m}{m + 7}\right)g\]\[m = \frac{3g - 28}{4 + g} = 0.10 \text{ kg}\]| Scheme | Marks | AO |
|---|---|---|
| Describes any valid assumption not related to those assumptions already stated in the question. Eg The particle is at least 2m above the ground Eg The particle does not collide with the load | E1 | 3.5b |
| (1) | ||
| (10 marks) |
Typical solution
I assumed that the top of the container does not reach the pulley