Your progress
Ticks are kept only in this browser: clearing your browsing data or changing device loses them. · ·

June 2025 Mechanics Q3

EdexcelCurrent spec11 marksConnected Particles

3. A package \(P\) of mass 2 kg is held at rest on a horizontal table.

One end of a thin rope is attached to \(P\).

The rope passes over a pulley that is fixed at the edge of the table.

The other end of the rope is attached to a package \(Q\) of mass 3 kg that hangs freely below the pulley.

Package \(P\) is 1.2 m from the pulley.

Package \(Q\) is 0.4 m above a horizontal floor and the rope is taut, as shown in Figure 2 below.

Figure 2: Package P, 2 kg, on a horizontal table, 1.2 m from a pulley at the edge of the table; the rope passes over the pulley to package Q, 3 kg, hanging 0.4 m above the floor
Figure 2

Package \(P\) is released from rest and \(Q\) moves downwards.

In an initial model of the motion of \(P\) and \(Q\)

  • the table is modelled as being smooth
  • the packages are modelled as particles
  • air resistance is modelled as being negligible
  • the pulley is modelled as being small and smooth
  • the rope is modelled as being light and inextensible

Using this model,

(a) write down an equation of motion for \(Q\) as it moves downwards, (2)
(b) find the acceleration of \(Q\) as it moves downwards, (3)
(c) find the speed of \(Q\) at the instant when \(Q\) hits the floor. (2)

Given that \(K\) seconds after \(Q\) hits the floor, \(P\) hits the pulley

(d) use the model to find the value of \(K\). (2)

In a refinement of the model, there is a resistance which acts against the motion of \(P\).

This refined model is now used to find the acceleration of \(Q\) as it moves downwards.

(e) State, with a reason, whether this new acceleration will be greater than, equal to, or less than, the acceleration found in part (b). (1)
(f) Suggest one further refinement that could be made to the model, apart from including air resistance, that would make the model more realistic. (1)